Kernel console ready (press any key to activate)
Program loader at 0xffff8000003a2000
RAM disk at 0x00000000002c6000 (size 25165824 bytes)
[init:init(3)] init: HelenOS init
[init:locsrv(4)] loc: HelenOS Location Service
[init:rd(5)] rd: HelenOS RAM disk server
[init:rd(5)] rd: Found RAM disk at 0x00000000002c6000, 25165824 bytes
[init:vfs(6)] vfs: HelenOS VFS server
[init:logger(7)] logger: HelenOS Logging Service
[init:ext4fs(8)] ext4fs: HelenOS ext4 file system server
[init:ns(2)] ns: HelenOS IPC Naming Service
[init:ns(2)] ns: Accepting connections
[init:logger(7)] logger: Accepting connections
[init:locsrv(4)] loc: Accepting connections
[init:vfs(6)] vfs: Accepting connections
[init:rd(5)] rd: Accepting connections
[init:ext4fs(8)] ext4fs: Accepting connections
[init:init(3)] init: Root file system mounted on / (ext4fs at bd/initrd)
[init:init(3)] init: Starting /srv/fs/tmpfs
[/srv/fs/tmpfs(9)] tmpfs: HelenOS TMPFS file system server
[/srv/fs/tmpfs(9)] tmpfs: Accepting connections
[init:init(3)] init: Starting /srv/fs/exfat
[/srv/fs/exfat(10)] exfat: HelenOS exFAT file system server
[/srv/fs/exfat(10)] exfat: Accepting connections
[init:init(3)] init: Starting /srv/fs/fat
[/srv/fs/fat(11)] fat: HelenOS FAT file system server
[/srv/fs/fat(11)] fat: Accepting connections
[init:init(3)] init: Starting /srv/fs/cdfs
[/srv/fs/cdfs(12)] cdfs: HelenOS cdfs file system server
[/srv/fs/cdfs(12)] cdfs: Accepting connections
[init:init(3)] init: Starting /srv/fs/mfs
[/srv/fs/mfs(13)] mfs: HelenOS Minix file system server
[/srv/fs/mfs(13)] mfs: Accepting connections
[init:init(3)] init: Starting /srv/klog
[kernel/arch] warn: MADT: Skipping L_APIC_NMI entry (type=4)
[init:init(3)] init: Starting /srv/fs/locfs
[kernel/arch] note: 0xffffffff800f5d10: MPS Floating Pointer Structure
[kernel/other] note: Program loader at 0xffff8000003a2000
[kernel/other] note: RAM disk at 0x00000000002c6000 (size 25165824 bytes)
[/srv/fs/locfs(15)] locfs: HelenOS Device Filesystem
[/srv/fs/locfs(15)] locfs: Accepting connections
[init:init(3)] init: Starting /srv/taskmon
[/srv/taskmon(16)] taskmon: Task Monitoring Service
[init:init(3)] init: Location service file system mounted on /loc (locfs)
[init:init(3)] init: Temporary file system mounted on /tmp (tmpfs)
[init:init(3)] init: Starting /srv/devman
[/srv/devman(17)] devman: HelenOS Device Manager
[/srv/devman(17)] devman: Accepting connections.
[/drv/root/root(18)] root: HelenOS root device driver
[init:init(3)] init: Unable to stat /srv/hid/s3c24xx_uart
[devman] note: The `root' driver was successfully registered as running.
[init:init(3)] init: Unable to stat /srv/hid/s3c24xx_ts
[init:init(3)] init: Starting /srv/bd/vbd
[/srv/bd/vbd(19)] vbd: Virtual Block Device service
[/srv/bd/vbd(19)] vbd: Accepting connections.
[/drv/pc/pc(21)] pc: HelenOS PC platform driver
[/drv/virt/virt(20)] virt: HelenOS virtual devices root driver
[init:init(3)] init: Starting /srv/volsrv
[devman] note: The `pc' driver was successfully registered as running.
[devman] note: The `virt' driver was successfully registered as running.
[virt] note: Registered child device `kfb'
[/srv/volsrv(22)] volsrv: Volume service
[/drv/kfb/kfb(23)] kfb: HelenOS kernel framebuffer driver
[devman] note: The `kfb' driver was successfully registered as running.
[/drv/pciintel/pciintel(24)] pciintel: HelenOS PCI bus driver (Intel method 1).
[devman] note: The `pciintel' driver was successfully registered as running.
[devman] note: Function `/virt/kfb/vsl0' added to category `visualizer'.
[/srv/volsrv(22)] volsrv: Accepting connections.
[/drv/kfb/kfb(23)] kfb: Accepting connections
[init:init(3)] init: Starting /srv/net/loopip
[devman] error: No driver found for device `/hw/sys/00:00.0'.
[devman] error: No driver found for device `/hw/sys/00:01.1'.
[pciintel] note: Function 00:01.2 uses irq b.
[pciintel] note: Function 00:01.3 uses irq 9.
[devman] error: No driver found for device `/hw/sys/00:01.3'.
[devman] error: No driver found for device `/hw/sys/00:02.0'.
[pciintel] note: Function 00:03.0 uses irq b.
[pciintel] note: Function 00:04.0 uses irq b.
[devman] note: Function `/hw/sys/ctl' added to category `pci'.
[/srv/net/loopip(25)] loopip: HelenOS loopback IP link provider
[/srv/net/loopip(25)] loopip: Accepting connections.
[init:init(3)] init: Starting /srv/net/ethip
[/drv/isa/isa(26)] isa: HelenOS ISA bus driver
[devman] note: The `isa' driver was successfully registered as running.
[isa] note: Added mem range (addr=0x20, size=0x2) to function i8259
[isa] note: Added mem range (addr=0xa0, size=0x2) to function i8259
[/drv/uhci/uhci(27)] uhci: HelenOS UHCI driver.
[isa] note: Added mem range (addr=0xfec00000, size=0x14) to function apic
[devman] note: The `uhci' driver was successfully registered as running.
[/drv/e1k/e1k(28)] e1k: HelenOS E1000 network adapter driver
[/drv/hdaudio/hdaudio(29)] hdaudio: High Definition Audio driver
[isa] note: Added irq 0x4 to function com1
[devman] note: The `e1k' driver was successfully registered as running.
[isa] note: Added io range (addr=0x3f8, size=0x8) to function com1
[devman] note: The `hdaudio' driver was successfully registered as running.
[devman] note: Function `/hw/sys/00:01.2/ctl' added to category `usbhc'.
[hdaudio] note: hda_dev_add()
[isa] note: Added irq 0x3 to function com2
[isa] note: Added io range (addr=0x2f8, size=0x8) to function com2
[hdaudio] note: create parent sess
[isa] note: Added io range (addr=0x378, size=0x8) to function lpt1
[hdaudio] note: get HW res list
[isa] note: Added irq 0x7 to function lpt1
[hdaudio] note: hda reg base: febf0000
[hdaudio] note: enable PIO
[isa] note: Added io range (addr=0x278, size=0x8) to function lpt2
[hdaudio] note: IRQs: 1
[isa] note: Added irq 0x5 to function lpt2
[hdaudio] note: interrupt no: 11
[isa] note: Added irq 0x1 to function i8042
[hdaudio] note: range0.base=4273930240
[isa] note: Added irq 0xc to function i8042
[isa] note: Added io range (addr=0x60, size=0x5) to function i8042
[isa] note: Added irq 0x5 to function ne2k
[isa] note: Added io range (addr=0x300, size=0x20) to function ne2k
[isa] note: Added io range (addr=0x220, size=0x20) to function sb16
[isa] note: Added io range (addr=0x330, size=0x2) to function sb16
[isa] note: Added irq 0x5 to function sb16
[isa] note: Added dma 0x1 to function sb16
[isa] note: Added dma 0x5 to function sb16
[isa] note: Added io range (addr=0x70, size=0x2) to function cmos-rtc
[isa] note: Added io range (addr=0x1f0, size=0x8) to function ata-c1
[isa] note: Added io range (addr=0x3f0, size=0x8) to function ata-c1
[isa] note: Added io range (addr=0x170, size=0x8) to function ata-c2
[isa] note: Added io range (addr=0x370, size=0x8) to function ata-c2
[isa] note: Added io range (addr=0x1e8, size=0x8) to function ata-c3
[isa] note: Added io range (addr=0x3e8, size=0x8) to function ata-c3
[isa] note: Added io range (addr=0x168, size=0x8) to function ata-c4
[isa] note: Added io range (addr=0x368, size=0x8) to function ata-c4
[isa] note: Finished enumerating legacy functions
[/srv/net/ethip(30)] ethip: HelenOS IP over Ethernet service
[/srv/net/ethip(30)] ethip: Accepting connections.
[init:init(3)] init: Starting /srv/net/inetsrv
[/drv/i8259/i8259(31)] i8259: i8259 Interrupt Controller driver
[devman] note: The `i8259' driver was successfully registered as running.
[devman] note: Function `/hw/sys/00:01.0/i8259/a' added to category `irc'.
[/drv/apic/apic(32)] apic: APIC driver
[devman] note: The `apic' driver was successfully registered as running.
[hdaudio] note: HDA version 1.0
[/drv/apic/apic(32)] apic: No APIC found
[hdaudio] note: reg 0xe STATESTS = 0x1
[hdaudio] note: after clearing reg 0xe STATESTS = 0x0
[hdaudio] note: Taking controller out of reset.
[/drv/ns8250/ns8250(33)] ns8250: HelenOS serial port driver
[devman] note: The `ns8250' driver was successfully registered as running.
[hdaudio] note: gctl=0x1
[hdaudio] note: Controller is out of reset.
[ns8250] note: Device com1 was assigned irq = 0x4.
[uhci] note: Controlling new `uhci' device `00:01.2'.
[hdaudio] note: Read GCAP
[hdaudio] note: GCAP: 0x4401 (64OK=1)
[hdaudio] note: iss: 4, oss: 4, bss: 0
[/drv/pc-lpt/pc-lpt(34)] pc-lpt: PC parallel port driver
[hdaudio] note: STATESTS = 0x0
[devman] note: The `pc-lpt' driver was successfully registered as running.
[hdaudio] note: intctl (0x20) := 0xc0000000
[ns8250] note: Device com1 was assigned I/O address = 0x0x3f8.
[devman] note: Function `/hw/sys/00:01.0/lpt1/a' added to category `printer-port'.
[hdaudio] note: hda_corb_init()
[devman] note: Function `/hw/sys/00:01.0/com1/a' added to category `serial'.
[hdaudio] note: Setting CORB Size register to 0x42
[ns8250] note: Device com1 successfully initialized.
[hdaudio] note: Set CORB base registers
[hdaudio] note: Reset CORB Read/Write pointers
[ns8250] note: Device com2 was assigned irq = 0x3.
[hdaudio] note: CORBctl (0x4c) = 0x2
[/drv/i8042/i8042(35)] i8042: HelenOS PS/2 driver.
[ns8250] note: Device com2 was assigned I/O address = 0x0x2f8.
[hdaudio] note: CORB initialized
[devman] note: The `i8042' driver was successfully registered as running.
[hdaudio] note: hda_rirb_init()
[devman] error: No driver found for device `/hw/sys/00:01.0/com2'.
[hdaudio] note: Setting RIRB Size register to 0x42
[hdaudio] note: Set RIRB base registers
[hdaudio] note: Reset RIRB Write pointer
[hdaudio] note: RIRBctl (0x5c) = 0x2
[i8042] note: Controlling 'i8042' (44).
[hdaudio] note: RIRB initialized
[/drv/ne2k/ne2k(36)] ne2k: HelenOS NE 2000 network adapter driver
[hdaudio] note: call hda_codec_init()
[devman] note: The `ne2k' driver was successfully registered as running.
[hdaudio] note: hda_get_subnc -> EOK
[hdaudio] note: sfg=1 nfg=1
[devman] error: No driver found for device `/hw/sys/00:01.0/ne2k'.
[hdaudio] note: Enumerate FG 1
[/drv/sb16/sb16(37)] sb16: HelenOS SB16 audio driver.
[/drv/ata_bd/ata_bd(39)] ata_bd: HelenOS ATA(PI) device driver
[/drv/cmos-rtc/cmos-rtc(38)] cmos-rtc: HelenOS RTC driver
[hdaudio] note: hda_get_fgrp_type -> EOK
[hdaudio] note: unsol: 0, grptype: 1
[devman] note: The `sb16' driver was successfully registered as running.
[devman] note: The `ata_bd' driver was successfully registered as running.
[hdaudio] note: GPIO: wake=0 unsol=0 gpis=0 gpos=0 gpios=0
[devman] note: The `cmos-rtc' driver was successfully registered as running.
[hdaudio] note: aw 1 is power control-capable
[hdaudio] note: aw 1: power state = 0x0
[cmos-rtc] note: Device cmos-rtc was assigned I/O address 0x70
[sb16] note: PIO registers at 0x0000000000000220 accessible.
[ata_bd] note: I/O address 0x00000000000001f0/0x00000000000003f0
[sb16] error: Invalid DSP reset response: ff.
[ata_bd] note: Identify drive 0...
[hdaudio] note: hda_get_subnc -> EOK
[sb16] error: Failed to initialize SB DSP: [EIO]Input/output error.
[devman] note: Function `/hw/sys/00:01.0/cmos-rtc/a' added to category `clock'.
[hdaudio] note: saw=2 baw=4
[sb16] error: Failed to init sb16 driver: [EIO]Input/output error.
[cmos-rtc] note: Device cmos-rtc successfully initialized
[hdaudio] note: aw 2: type=0x0 caps=0x1d
[/srv/net/inetsrv(40)] inetsrv: HelenOS Internet Protocol service
[/srv/net/inetsrv(40)] inetsrv: Accepting connections.
[hdaudio] note: Output widget 2: rates=0x201fc formats=0x1
[init:init(3)] init: Starting /srv/net/tcp
[hdaudio] note: out amp caps 0x80034a4a (offset=0x4a)
[hdaudio] note: gain/mute: L:0x4a R:0x4a
[hdaudio] note: aw 3: type=0x4 caps=0x400101
[hdaudio] note: Connections for widget 3:
[hdaudio] note: <- 2 *** current *** 
[hdaudio] note: aw 3: PIN cdfgef=0x4010
[hdaudio] note: aw 3 : PIN caps=0x10
[hdaudio] note: PIN 3 will enable output
[hdaudio] note: Setting PIN 3 ctl to 0x40
[hdaudio] note: PIN 3 ctl reads as 0x40
[hdaudio] note: aw 4: type=0x1 caps=0x10011b
[hdaudio] note: Connections for widget 4:
[/drv/usbhub/usbhub(41)] usbhub: HelenOS USB hub driver.
[hdaudio] note: <- 5 *** current *** 
[hdaudio] note: Selected input widget 4
[devman] note: The `usbhub' driver was successfully registered as running.
[hdaudio] note: Input widget 4: rates=0x201fc formats=0x1
[hdaudio] note: in amp caps 0x0 (offset=0x0)
[usbhub] note: (0x000000000041fc10): Power switching not supported, ports always powered.
[/drv/ps2mouse/ps2mouse(43)] ps2mouse: HelenOS ps/2 mouse driver.
[/drv/xtkbd/xtkbd(42)] xtkbd: HelenOS XT keyboard driver.
[hdaudio] note: in:0 gain/mute: L:0x0 R:0x0
[devman] note: The `ps2mouse' driver was successfully registered as running.
[devman] note: The `xtkbd' driver was successfully registered as running.
[usbhub] note: Controlling full-speed hub 'roothub' (0x000000000041fc10: 2 ports).
[devman] note: Function `/hw/sys/00:01.0/i8042/ps2b/mouse' added to category `mouse'.
[hdaudio] note: in:1 gain/mute: L:0x0 R:0x0
[devman] note: Function `/hw/sys/00:01.0/i8042/ps2a/kbd' added to category `keyboard'.
[xtkbd] note: Controlling 'ps2a' (65).
[ps2mouse] note: Enabled IntelliMouse extensions
[hdaudio] note: in:2 gain/mute: L:0x0 R:0x0
[ps2mouse] note: Enabled 4th and 5th button.
[ps2mouse] note: Controlling 'ps2b' (67).
[hdaudio] note: in:3 gain/mute: L:0x0 R:0x0
[hdaudio] note: in:4 gain/mute: L:0x0 R:0x0
[/srv/net/tcp(44)] tcp: TCP (Transmission Control Protocol) network module
[hdaudio] note: in:5 gain/mute: L:0x0 R:0x0
[/srv/net/tcp(44)] tcp: Accepting connections.
[init:init(3)] init: Starting /srv/net/udp
[hdaudio] note: in:6 gain/mute: L:0x0 R:0x0
[ata_bd] note: Not found.
[ata_bd] note: Identify drive 1...
[hdaudio] note: in:7 gain/mute: L:0x0 R:0x0
[hdaudio] note: in:8 gain/mute: L:0x0 R:0x0
[hdaudio] note: in:9 gain/mute: L:0x0 R:0x0
[hdaudio] note: in:10 gain/mute: L:0x0 R:0x0
[hdaudio] note: in:11 gain/mute: L:0x0 R:0x0
[hdaudio] note: in:12 gain/mute: L:0x0 R:0x0
[hdaudio] note: in:13 gain/mute: L:0x0 R:0x0
[hdaudio] note: in:14 gain/mute: L:0x0 R:0x0
[hdaudio] note: aw 5: type=0x4 caps=0x400001
[hdaudio] note: Connections for widget 5:
[hdaudio] note: aw 5: PIN cdfgef=0x805020
[hdaudio] note: aw 5 : PIN caps=0x20
[hdaudio] note: PIN 5 will enable input
[hdaudio] note: Setting PIN 5 ctl to 0x20
[hdaudio] note: PIN 5 ctl reads as 0x20
[/srv/net/udp(45)] udp: UDP (User Datagram Protocol) service
[hdaudio] note: corbwp=76, corbrp=76
[hdaudio] note: corbctl=0x2, corbsts=0x0
[hdaudio] note: rirbwp=0x4c, soft-rirbrp=0x4c
[hdaudio] note: solrb_wp=0x4c, solrb_rp=0x4c
[/srv/net/udp(45)] udp: Accepting connections.
[hdaudio] note: Codec OK
[hdaudio] note: intsts=0x0
[init:init(3)] init: Starting /srv/net/dnsrsrv
[hdaudio] note: sdesc[4].sts=0x20
[hdaudio] note: create function
[devman] note: Function `/hw/sys/00:04.0/pcm' added to category `audio-pcm'.
[/srv/net/dnsrsrv(46)] dnsres: DNS Resolution Service
[/srv/net/dnsrsrv(46)] dnsres: Accepting connections.
[init:init(3)] init: Starting /srv/net/dhcp
[/srv/net/dhcp(47)] dhcp: DHCP Service
[/srv/net/dhcp(47)] dhcp: Accepting connections.
[init:init(3)] init: Starting /srv/net/nconfsrv
[/srv/net/nconfsrv(48)] nconfsrv: HelenOS Network configuration service
[nconfsrv] note: Found IP link '36'
[nconfsrv] note: Configure link net/loopback
[/srv/net/nconfsrv(48)] nconfsrv: Accepting connections.
[init:init(3)] init: Starting /srv/clipboard
[ata_bd] note: Not found.
[ata_bd] warn: No disks detected.
[ata_bd] error: Failed initializing ATA controller.
[ata_bd] note: I/O address 0x0000000000000170/0x0000000000000370
[ata_bd] note: Identify drive 0...
[ata_bd] note: QEMU DVD-ROM: PACKET 14600 blocks 7 MB.
[ata_bd] note: Identify drive 1...
[/srv/clipboard(49)] clipboard: HelenOS clipboard service
[/srv/clipboard(49)] clipboard: Accepting connections
[init:init(3)] init: Starting /srv/hid/remcons
[devman] note: Function `/hw/sys/00:03.0/port0' added to category `nic'.
[nconfsrv] note: Found IP link '55'
[nconfsrv] note: Configure link net/eth1
[udp] note: udp_assoc_set_nolocal_srv()
[udp] note: Setting nolocal to true
[/srv/hid/remcons(50)] remcons: HelenOS Remote console service
[init:init(3)] init: Starting /srv/hid/input
[dhcp] note: dhcp_recv_msg()
[dhcp] note: dhcp_recv_msg() - call recv_cb
[dhcp] note: dhcp_recv_msg()
[dhcp] note: dhcp_recv_msg() - call recv_cb
[dhcp] note: net/eth1: Successfully configured.
[/srv/hid/input(51)] input: HelenOS input service
[/srv/hid/input(51)] input: Connected keyboard device 'devices/\hw\sys\00:01.0\i8042\ps2a\kbd'
[/srv/hid/input(51)] input: Connected mouse device 'devices/\hw\sys\00:01.0\i8042\ps2b\mouse'
[/srv/hid/input(51)] input: Accepting connections
[init:init(3)] init: Starting /srv/hid/output
[/srv/hid/output(52)] output: HelenOS output service
[/srv/hid/output(52)] output: Accepting connections
[init:init(3)] init: Starting /srv/audio/hound
[ata_bd] note: Not found.
[devman] note: Function `/hw/sys/00:01.0/ata-c2/d0' added to category `disk'.
[vbd] note: Found disk '59'
[ata_bd] note: I/O address 0x00000000000001e8/0x00000000000003e8
[ata_bd] note: Identify drive 0...
[vbd] note: Recognized disk label. Adding partitions.
[volsrv] note: Found partition '60'
[volsrv] note: vol_part_add_locked(60)
[volsrv] note: partition 60 is new
[volsrv] note: Probe partition devices/\hw\sys\00:01.0\ata-c2\d0p0
[volsrv] note: Found cdfs, label 'HelenOS-CD'
[volsrv] note: vol_volume_add_locked(0x0000000000416fa0)
[volsrv] note: Default mount point 'Auto'
[volsrv] note: Determine MP label='HelenOS-CD'
[volsrv] note: Create mount point '/vol/HelenOS-CD'
[volsrv] note: Call vfs_mount_path mp='/vol/HelenOS-CD' fstype='cdfs' svc_name='devices/\hw\sys\00:01.0\ata-c2\d0p0'
[volsrv] note: Mount to /vol/HelenOS-CD -> 0
[volsrv] note: Added partition 60
[/srv/audio/hound(53)] hound: HelenOS sound service
[hound] note: Running with service id 62
[hound] note: Added new device: 'devices/\hw\sys\00:04.0\pcm'
[hdaudio] note: hda_query_cap(0)
[hdaudio] note: hda_query_cap(1)
[volsrv] note: vol_get_volumes_srv()
[volsrv] note: vol_get_volumes_srv()
[init:init(3)] init: Creating live image directory structure.
[init:init(3)] init: Starting /srv/hid/compositor
[/srv/hid/compositor(54)] compositor: HelenOS Compositor server
[/srv/hid/compositor(54)] compositor: Accepting connections
[init:init(3)] init: Spawning /app/barber comp:0/winreg
[ata_bd] note: Not found.
[ata_bd] note: Identify drive 1...
[init:init(3)] init: Spawning /app/vlaunch comp:0/winreg
[init:init(3)] init: Spawning /app/vterm comp:0/winreg
[init:init(3)] init: Starting /srv/hid/console
[ata_bd] note: Not found.
[ata_bd] warn: No disks detected.
[ata_bd] error: Failed initializing ATA controller.
[ata_bd] note: I/O address 0x0000000000000168/0x0000000000000368
[ata_bd] note: Identify drive 0...
[/srv/hid/console(59)] console: HelenOS Console service
[/srv/hid/console(59)] console: Accepting connections
[init:init(3)] init: Spawning /app/getterm term/vc0 /loc --msg --wait -- /app/bdsh
[init:init(3)] init: Spawning /app/getterm term/vc1 /loc --wait -- /app/bdsh
[init:init(3)] init: Spawning /app/getterm term/vc2 /loc --wait -- /app/bdsh
[init:init(3)] init: Spawning /app/getterm term/vc3 /loc --wait -- /app/bdsh
[init:init(3)] init: Spawning /app/getterm term/vc4 /loc --wait -- /app/bdsh
[ata_bd] note: Not found.
[ata_bd] note: Identify drive 1...
[init:init(3)] init: Spawning /app/getterm term/vc5 /loc --wait -- /app/bdsh
[ata_bd] note: Not found.
[ata_bd] warn: No disks detected.
[ata_bd] error: Failed initializing ATA controller.