HelenOS sources

root/uspace/drv/nic/ar9271/htc.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. wmi_service_to_download_pipe
  2. wmi_service_to_upload_pipe
  3. htc_init_new_vif
  4. htc_config_frame_header
  5. htc_send_control_message
  6. htc_send_data_message
  7. htc_read_data_message
  8. htc_read_control_message
  9. htc_connect_service
  10. htc_config_credits
  11. htc_complete_setup
  12. htc_check_ready
  13. htc_device_init
  14. htc_init

/*
 * Copyright (c) 2014 Jan Kolarik
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/** @file htc.c
 *
 * Implementation of Atheros HTC communication.
 *
 */

#include <usb/debug.h>
#include <byteorder.h>
#include <errno.h>
#include <str_error.h>
#include "wmi.h"
#include "htc.h"
#include "nic/nic.h"
#include "ar9271.h"

/** HTC download pipes mapping.
 *
 * @param service_id Identification of WMI service.
 *
 * @return Number of pipe used for this service.
 *
 */
static inline uint8_t wmi_service_to_download_pipe(wmi_services_t service_id)
{
        return (service_id == WMI_CONTROL_SERVICE) ? 3 : 2;
}

/** HTC upload pipes mapping.
 *
 * @param service_id Identification of WMI service.
 *
 * @return Number of pipe used for this service.
 *
 */
static inline uint8_t wmi_service_to_upload_pipe(wmi_services_t service_id)
{
        return (service_id == WMI_CONTROL_SERVICE) ? 4 : 1;
}

errno_t htc_init_new_vif(htc_device_t *htc_device)
{
        htc_vif_msg_t vif_msg;
        htc_sta_msg_t sta_msg;

        memset(&vif_msg, 0, sizeof(htc_vif_msg_t));
        memset(&sta_msg, 0, sizeof(htc_sta_msg_t));

        nic_address_t addr;
        nic_t *nic =
            nic_get_from_ddf_dev(ieee80211_get_ddf_dev(htc_device->ieee80211_dev));
        nic_query_address(nic, &addr);

        memcpy(&vif_msg.addr, &addr.address, ETH_ADDR);
        memcpy(&sta_msg.addr, &addr.address, ETH_ADDR);

        ieee80211_operating_mode_t op_mode =
            ieee80211_query_current_op_mode(htc_device->ieee80211_dev);

        switch (op_mode) {
        case IEEE80211_OPMODE_ADHOC:
                vif_msg.op_mode = HTC_OPMODE_ADHOC;
                break;
        case IEEE80211_OPMODE_AP:
                vif_msg.op_mode = HTC_OPMODE_AP;
                break;
        case IEEE80211_OPMODE_MESH:
                vif_msg.op_mode = HTC_OPMODE_MESH;
                break;
        case IEEE80211_OPMODE_STATION:
                vif_msg.op_mode = HTC_OPMODE_STATION;
                break;
        }

        vif_msg.index = 0;
        vif_msg.rts_thres = host2uint16_t_be(HTC_RTS_THRESHOLD);

        wmi_send_command(htc_device, WMI_VAP_CREATE, (uint8_t *) &vif_msg,
            sizeof(vif_msg), NULL);

        sta_msg.is_vif_sta = 1;
        sta_msg.max_ampdu = host2uint16_t_be(0xFFFF);
        sta_msg.sta_index = 0;
        sta_msg.vif_index = 0;

        wmi_send_command(htc_device, WMI_NODE_CREATE, (uint8_t *) &sta_msg,
            sizeof(sta_msg), NULL);

        /* Write first 4 bytes of MAC address. */
        uint32_t id0;
        memcpy(&id0, &addr.address, 4);
        id0 = host2uint32_t_le(id0);
        wmi_reg_write(htc_device, AR9271_STATION_ID0, id0);

        /* Write last 2 bytes of MAC address (and preserve existing data). */
        uint32_t id1;
        wmi_reg_read(htc_device, AR9271_STATION_ID1, &id1);

        uint16_t id1_addr;
        memcpy(&id1_addr, &addr.address[4], 2);
        id1 = (id1 & ~AR9271_STATION_ID1_MASK) | host2uint16_t_le(id1_addr);
        wmi_reg_write(htc_device, AR9271_STATION_ID1, id1);

        return EOK;
}

static void htc_config_frame_header(htc_frame_header_t *header,
    size_t buffer_size, uint8_t endpoint_id)
{
        memset(header, 0, sizeof(htc_frame_header_t));

        header->endpoint_id = endpoint_id;
        header->payload_length =
            host2uint16_t_be(buffer_size - sizeof(htc_frame_header_t));
}

/** Send control HTC message to USB device.
 *
 * @param htc_device  HTC device structure.
 * @param buffer      Buffer with data to be sent to USB device
 *                    (without HTC frame header).
 * @param buffer_size Size of buffer (including HTC frame header).
 * @param endpoint_id Destination endpoint.
 *
 * @return EOK if succeed, error code otherwise.
 *
 */
errno_t htc_send_control_message(htc_device_t *htc_device, void *buffer,
    size_t buffer_size, uint8_t endpoint_id)
{
        htc_config_frame_header((htc_frame_header_t *) buffer, buffer_size,
            endpoint_id);

        ath_t *ath_device = htc_device->ath_device;

        return ath_device->ops->send_ctrl_message(ath_device, buffer,
            buffer_size);
}

/** Send data HTC message to USB device.
 *
 * @param htc_device  HTC device structure.
 * @param buffer      Buffer with data to be sent to USB device
 *                    (without HTC frame header).
 * @param buffer_size Size of buffer (including HTC frame header).
 * @param endpoint_id Destination endpoint.
 *
 * @return EOK if succeed, error code otherwise.
 *
 */
errno_t htc_send_data_message(htc_device_t *htc_device, void *buffer,
    size_t buffer_size, uint8_t endpoint_id)
{
        htc_config_frame_header((htc_frame_header_t *) buffer, buffer_size,
            endpoint_id);

        ath_t *ath_device = htc_device->ath_device;

        return ath_device->ops->send_data_message(ath_device, buffer,
            buffer_size);
}

/** Read HTC data message from USB device.
 *
 * @param htc_device       HTC device structure.
 * @param buffer           Buffer where data from USB device
 *                         will be stored.
 * @param buffer_size      Size of buffer.
 * @param transferred_size Real size of read data.
 *
 * @return EOK if succeed, error code otherwise.
 *
 */
errno_t htc_read_data_message(htc_device_t *htc_device, void *buffer,
    size_t buffer_size, size_t *transferred_size)
{
        ath_t *ath_device = htc_device->ath_device;

        return ath_device->ops->read_data_message(ath_device, buffer,
            buffer_size, transferred_size);
}

/** Read HTC control message from USB device.
 *
 * @param htc_device       HTC device structure.
 * @param buffer           Buffer where data from USB device
 *                         will be stored.
 * @param buffer_size      Size of buffer.
 * @param transferred_size Real size of read data.
 *
 * @return EOK if succeed, error code otherwise.
 *
 */
errno_t htc_read_control_message(htc_device_t *htc_device, void *buffer,
    size_t buffer_size, size_t *transferred_size)
{
        ath_t *ath_device = htc_device->ath_device;

        return ath_device->ops->read_ctrl_message(ath_device, buffer,
            buffer_size, transferred_size);
}

/** Initialize HTC service.
 *
 * @param htc_device           HTC device structure.
 * @param service_id           Identification of WMI service.
 * @param response_endpoint_no HTC endpoint to be used for
 *                             this service.
 *
 * @return EOK if succeed, EINVAL when failed to connect service,
 *         error code otherwise.
 *
 */
static errno_t htc_connect_service(htc_device_t *htc_device,
    wmi_services_t service_id, int *response_endpoint_no)
{
        size_t buffer_size = sizeof(htc_frame_header_t) +
            sizeof(htc_service_msg_t);
        void *buffer = malloc(buffer_size);
        memset(buffer, 0, buffer_size);

        /* Fill service message structure. */
        htc_service_msg_t *service_message = (htc_service_msg_t *)
            ((void *) buffer + sizeof(htc_frame_header_t));
        service_message->service_id =
            host2uint16_t_be(service_id);
        service_message->message_id =
            host2uint16_t_be(HTC_MESSAGE_CONNECT_SERVICE);
        service_message->download_pipe_id =
            wmi_service_to_download_pipe(service_id);
        service_message->upload_pipe_id =
            wmi_service_to_upload_pipe(service_id);
        service_message->connection_flags = 0;

        /* Send HTC message. */
        errno_t rc = htc_send_control_message(htc_device, buffer, buffer_size,
            htc_device->endpoints.ctrl_endpoint);
        if (rc != EOK) {
                free(buffer);
                usb_log_error("Failed to send HTC message. Error: %s\n", str_error_name(rc));
                return rc;
        }

        free(buffer);

        buffer_size = htc_device->ath_device->ctrl_response_length;
        buffer = malloc(buffer_size);

        /* Read response from device. */
        rc = htc_read_control_message(htc_device, buffer, buffer_size, NULL);
        if (rc != EOK) {
                free(buffer);
                usb_log_error("Failed to receive HTC service connect response. "
                    "Error: %s\n", str_error_name(rc));
                return rc;
        }

        htc_service_resp_msg_t *response_message = (htc_service_resp_msg_t *)
            ((void *) buffer + sizeof(htc_frame_header_t));

        /*
         * If service was successfully connected,
         * write down HTC endpoint number that will
         * be used for communication.
         */
        if (response_message->status == HTC_SERVICE_SUCCESS) {
                *response_endpoint_no = response_message->endpoint_id;
                rc = EOK;
        } else {
                usb_log_error("Failed to connect HTC service. "
                    "Message status: %d\n", response_message->status);
                rc = EINVAL;
        }

        free(buffer);

        return rc;
}

/** HTC credits initialization message.
 *
 * @param htc_device HTC device structure.
 *
 * @return EOK if succeed, error code otherwise.
 *
 */
static errno_t htc_config_credits(htc_device_t *htc_device)
{
        size_t buffer_size = sizeof(htc_frame_header_t) +
            sizeof(htc_config_msg_t);
        void *buffer = malloc(buffer_size);
        htc_config_msg_t *config_message = (htc_config_msg_t *)
            ((void *) buffer + sizeof(htc_frame_header_t));

        config_message->message_id =
            host2uint16_t_be(HTC_MESSAGE_CONFIG);
        /* Magic number to initialize device. */
        config_message->credits = 33;
        config_message->pipe_id = 1;

        /* Send HTC message. */
        errno_t rc = htc_send_control_message(htc_device, buffer, buffer_size,
            htc_device->endpoints.ctrl_endpoint);
        if (rc != EOK) {
                free(buffer);
                usb_log_error("Failed to send HTC config message. "
                    "Error: %s\n", str_error_name(rc));
                return rc;
        }

        free(buffer);

        buffer_size = htc_device->ath_device->ctrl_response_length;
        buffer = malloc(buffer_size);

        /* Check response from device. */
        rc = htc_read_control_message(htc_device, buffer, buffer_size, NULL);
        if (rc != EOK) {
                usb_log_error("Failed to receive HTC config response message. "
                    "Error: %s\n", str_error_name(rc));
        }

        free(buffer);

        return rc;
}

/** HTC setup complete confirmation message.
 *
 * @param htc_device HTC device structure.
 *
 * @return EOK if succeed, error code otherwise.
 *
 */
static errno_t htc_complete_setup(htc_device_t *htc_device)
{
        size_t buffer_size = sizeof(htc_frame_header_t) +
            sizeof(htc_setup_complete_msg_t);
        void *buffer = malloc(buffer_size);
        htc_setup_complete_msg_t *complete_message =
            (htc_setup_complete_msg_t *)
            ((void *) buffer + sizeof(htc_frame_header_t));

        complete_message->message_id =
            host2uint16_t_be(HTC_MESSAGE_SETUP_COMPLETE);

        /* Send HTC message. */
        errno_t rc = htc_send_control_message(htc_device, buffer, buffer_size,
            htc_device->endpoints.ctrl_endpoint);
        if (rc != EOK)
                usb_log_error("Failed to send HTC setup complete message. "
                    "Error: %s\n", str_error_name(rc));

        free(buffer);

        return rc;
}

/** Try to fetch ready message from device.
 *
 * Checks that firmware was successfully loaded on device side.
 *
 * @param htc_device HTC device structure.
 *
 * @return EOK if succeed, EINVAL if response error,
 *         error code otherwise.
 *
 */
static errno_t htc_check_ready(htc_device_t *htc_device)
{
        size_t buffer_size = htc_device->ath_device->ctrl_response_length;
        void *buffer = malloc(buffer_size);

        /* Read response from device. */
        errno_t rc = htc_read_control_message(htc_device, buffer, buffer_size,
            NULL);
        if (rc != EOK) {
                free(buffer);
                usb_log_error("Failed to receive HTC check ready message. "
                    "Error: %s\n", str_error_name(rc));
                return rc;
        }

        uint16_t *message_id = (uint16_t *) ((void *) buffer +
            sizeof(htc_frame_header_t));
        if (uint16_t_be2host(*message_id) == HTC_MESSAGE_READY)
                rc = EOK;
        else
                rc = EINVAL;

        free(buffer);

        return rc;
}

/** Initialize HTC device structure.
 *
 * @param ath_device Atheros WiFi device connected
 *                   with this HTC device.
 * @param htc_device HTC device structure to be initialized.
 *
 * @return EOK if succeed, error code otherwise.
 *
 */
errno_t htc_device_init(ath_t *ath_device, ieee80211_dev_t *ieee80211_dev,
    htc_device_t *htc_device)
{
        fibril_mutex_initialize(&htc_device->rx_lock);
        fibril_mutex_initialize(&htc_device->tx_lock);

        htc_device->endpoints.ctrl_endpoint = 0;

        htc_device->ath_device = ath_device;
        htc_device->ieee80211_dev = ieee80211_dev;

        return EOK;
}

/** HTC communication initalization.
 *
 * @param htc_device HTC device structure.
 *
 * @return EOK if succeed, error code otherwise.
 *
 */
errno_t htc_init(htc_device_t *htc_device)
{
        /* First check ready message in device. */
        errno_t rc = htc_check_ready(htc_device);
        if (rc != EOK) {
                usb_log_error("Device is not in ready state after loading "
                    "firmware.\n");
                return rc;
        }

        /*
         * HTC services initialization start.
         */
        rc = htc_connect_service(htc_device, WMI_CONTROL_SERVICE,
            &htc_device->endpoints.wmi_endpoint);
        if (rc != EOK) {
                usb_log_error("Error while initalizing WMI service.\n");
                return rc;
        }

        rc = htc_connect_service(htc_device, WMI_BEACON_SERVICE,
            &htc_device->endpoints.beacon_endpoint);
        if (rc != EOK) {
                usb_log_error("Error while initalizing beacon service.\n");
                return rc;
        }

        rc = htc_connect_service(htc_device, WMI_CAB_SERVICE,
            &htc_device->endpoints.cab_endpoint);
        if (rc != EOK) {
                usb_log_error("Error while initalizing CAB service.\n");
                return rc;
        }

        rc = htc_connect_service(htc_device, WMI_UAPSD_SERVICE,
            &htc_device->endpoints.uapsd_endpoint);
        if (rc != EOK) {
                usb_log_error("Error while initalizing UAPSD service.\n");
                return rc;
        }

        rc = htc_connect_service(htc_device, WMI_MGMT_SERVICE,
            &htc_device->endpoints.mgmt_endpoint);
        if (rc != EOK) {
                usb_log_error("Error while initalizing MGMT service.\n");
                return rc;
        }

        rc = htc_connect_service(htc_device, WMI_DATA_BE_SERVICE,
            &htc_device->endpoints.data_be_endpoint);
        if (rc != EOK) {
                usb_log_error("Error while initalizing data best effort "
                    "service.\n");
                return rc;
        }

        rc = htc_connect_service(htc_device, WMI_DATA_BK_SERVICE,
            &htc_device->endpoints.data_bk_endpoint);
        if (rc != EOK) {
                usb_log_error("Error while initalizing data background "
                    "service.\n");
                return rc;
        }

        rc = htc_connect_service(htc_device, WMI_DATA_VIDEO_SERVICE,
            &htc_device->endpoints.data_video_endpoint);
        if (rc != EOK) {
                usb_log_error("Error while initalizing data video service.\n");
                return rc;
        }

        rc = htc_connect_service(htc_device, WMI_DATA_VOICE_SERVICE,
            &htc_device->endpoints.data_voice_endpoint);
        if (rc != EOK) {
                usb_log_error("Error while initalizing data voice service.\n");
                return rc;
        }

        /*
         * HTC services initialization end.
         */

        /* Credits initialization message. */
        rc = htc_config_credits(htc_device);
        if (rc != EOK) {
                usb_log_error("Failed to send HTC config message.\n");
                return rc;
        }

        /* HTC setup complete confirmation message. */
        rc = htc_complete_setup(htc_device);
        if (rc != EOK) {
                usb_log_error("Failed to send HTC complete setup message.\n");
                return rc;
        }

        usb_log_info("HTC services initialization finished successfully.\n");

        return EOK;
}

/* [<][>][^][v][top][bottom][index][help] */
HelenOS homepage, sources at GitHub