HelenOS sources

/* [<][>][^][v][top][bottom][index][help] */
This source file includes following definitions.
usb_hub_port_init
get_hub_port
remove_device
get_port_speed
enumerate_device_usb2
enumerate_device_usb3
enumerate_device
port_changed_connection
port_changed_enabled
port_changed_overcurrent
port_changed_reset
check_port_change
usb_hub_port_process_interrupt
/*
 * Copyright (c) 2011 Vojtech Horky
 * Copyright (c) 2011 Jan Vesely
 * Copyright (c) 2018 Ondrej Hlavaty
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/** @addtogroup drvusbhub
 * @{
 */
/** @file
 * Hub ports functions.
 */

#include <stdbool.h>
#include <errno.h>
#include <str_error.h>
#include <inttypes.h>
#include <fibril_synch.h>
#include <usbhc_iface.h>

#include <usb/debug.h>

#include "port.h"
#include "usbhub.h"
#include "status.h"

#define port_log(lvl, port, fmt, ...) do { \
                usb_log_##lvl("(%p-%u): " fmt, \
                    (port->hub), (port->port_number), ##__VA_ARGS__); \
        } while (0)

/** Initialize hub port information.
 *
 * @param port Port to be initialized.
 */
void usb_hub_port_init(usb_hub_port_t *port, usb_hub_dev_t *hub,
    unsigned int port_number)
{
        assert(port);
        memset(port, 0, sizeof(*port));
        port->hub = hub;
        port->port_number = port_number;
        usb_port_init(&port->base);
}

static inline usb_hub_port_t *get_hub_port(usb_port_t *port)
{
        assert(port);
        return (usb_hub_port_t *) port;
}

/**
 * Inform the HC that the device on port is gone.
 */
static void remove_device(usb_port_t *port_base)
{
        usb_hub_port_t *port = get_hub_port(port_base);

        async_exch_t *exch = usb_device_bus_exchange_begin(port->hub->usb_device);
        if (!exch) {
                port_log(error, port, "Cannot remove the device, "
                    "failed creating exchange.");
                return;
        }

        const errno_t err = usbhc_device_remove(exch, port->port_number);
        if (err)
                port_log(error, port, "Failed to remove device: %s",
                    str_error(err));

        usb_device_bus_exchange_end(exch);
}

static usb_speed_t get_port_speed(usb_hub_port_t *port, uint32_t status)
{
        assert(port);
        assert(port->hub);

        return usb_port_speed(port->hub->speed, status);
}

/**
 * Routine for adding a new device in USB2.
 */
static errno_t enumerate_device_usb2(usb_hub_port_t *port, async_exch_t *exch)
{
        errno_t err;

        port_log(debug, port, "Requesting default address.");
        err = usb_hub_reserve_default_address(port->hub, exch, &port->base);
        if (err != EOK) {
                port_log(error, port, "Failed to reserve default address: %s",
                    str_error(err));
                return err;
        }

        /* Reservation of default address could have blocked */
        if (port->base.state != PORT_CONNECTING)
                goto out_address;

        port_log(debug, port, "Resetting port.");
        if ((err = usb_hub_set_port_feature(port->hub, port->port_number,
            USB_HUB_FEATURE_PORT_RESET))) {
                port_log(warning, port, "Port reset request failed: %s",
                    str_error(err));
                goto out_address;
        }

        if ((err = usb_port_wait_for_enabled(&port->base))) {
                port_log(error, port, "Failed to reset port: %s",
                    str_error(err));
                goto out_address;
        }

        port_log(debug, port, "Enumerating device.");
        if ((err = usbhc_device_enumerate(exch, port->port_number,
            port->speed))) {
                port_log(error, port, "Failed to enumerate device: %s",
                    str_error(err));
                /* Disable the port */
                usb_hub_clear_port_feature(port->hub, port->port_number,
                    USB2_HUB_FEATURE_PORT_ENABLE);
                goto out_address;
        }

        port_log(debug, port, "Device enumerated");

out_address:
        usb_hub_release_default_address(port->hub, exch);
        return err;
}

/**
 * Routine for adding a new device in USB 3.
 */
static errno_t enumerate_device_usb3(usb_hub_port_t *port, async_exch_t *exch)
{
        errno_t err;

        port_log(debug, port, "Issuing a warm reset.");
        if ((err = usb_hub_set_port_feature(port->hub, port->port_number,
            USB3_HUB_FEATURE_BH_PORT_RESET))) {
                port_log(warning, port, "Port reset request failed: %s",
                    str_error(err));
                return err;
        }

        if ((err = usb_port_wait_for_enabled(&port->base))) {
                port_log(error, port, "Failed to reset port: %s",
                    str_error(err));
                return err;
        }

        port_log(debug, port, "Enumerating device.");
        if ((err = usbhc_device_enumerate(exch, port->port_number,
            port->speed))) {
                port_log(error, port, "Failed to enumerate device: %s",
                    str_error(err));
                return err;
        }

        port_log(debug, port, "Device enumerated");
        return EOK;
}

static errno_t enumerate_device(usb_port_t *port_base)
{
        usb_hub_port_t *port = get_hub_port(port_base);

        port_log(debug, port, "Setting up new device.");
        async_exch_t *exch = usb_device_bus_exchange_begin(port->hub->usb_device);
        if (!exch) {
                port_log(error, port, "Failed to create exchange.");
                return ENOMEM;
        }

        const errno_t err = port->hub->speed == USB_SPEED_SUPER ?
            enumerate_device_usb3(port, exch) :
            enumerate_device_usb2(port, exch);

        usb_device_bus_exchange_end(exch);
        return err;
}

static void port_changed_connection(usb_hub_port_t *port, usb_port_status_t status)
{
        const bool connected = !!(status & USB_HUB_PORT_STATUS_CONNECTION);
        port_log(debug, port, "Connection change: device %s.", connected ?
            "attached" : "removed");

        if (connected) {
                usb_port_connected(&port->base, &enumerate_device);
        } else {
                usb_port_disabled(&port->base, &remove_device);
        }
}

static void port_changed_enabled(usb_hub_port_t *port, usb_port_status_t status)
{
        const bool enabled = !!(status & USB_HUB_PORT_STATUS_ENABLE);
        if (enabled) {
                port_log(warning, port, "Port unexpectedly changed to enabled.");
        } else {
                usb_port_disabled(&port->base, &remove_device);
        }
}

static void port_changed_overcurrent(usb_hub_port_t *port,
    usb_port_status_t status)
{
        const bool overcurrent = !!(status & USB_HUB_PORT_STATUS_OC);

        /*
         * According to the USB specs:
         * 11.13.5 Over-current Reporting and Recovery
         * Hub device is responsible for putting port in power off
         * mode. USB system software is responsible for powering port
         * back on when the over-current condition is gone
         */

        usb_port_disabled(&port->base, &remove_device);

        if (!overcurrent) {
                const errno_t err = usb_hub_set_port_feature(port->hub,
                    port->port_number, USB_HUB_FEATURE_PORT_POWER);
                if (err)
                        port_log(error, port, "Failed to set port power "
                            "after OC: %s.", str_error(err));
        }
}

static void port_changed_reset(usb_hub_port_t *port, usb_port_status_t status)
{
        const bool enabled = !!(status & USB_HUB_PORT_STATUS_ENABLE);

        if (enabled) {
                port->speed = get_port_speed(port, status);
                usb_port_enabled(&port->base);
        } else
                usb_port_disabled(&port->base, &remove_device);
}

typedef void (*change_handler_t)(usb_hub_port_t *, usb_port_status_t);

static void check_port_change(usb_hub_port_t *port, usb_port_status_t *status,
    change_handler_t handler, usb_port_status_t mask,
    usb_hub_class_feature_t feature)
{
        if ((*status & mask) == 0)
                return;

        /* Clear the change so it won't come again */
        usb_hub_clear_port_feature(port->hub, port->port_number, feature);

        if (handler)
                handler(port, *status);

        /* Mark the change as resolved */
        *status &= ~mask;
}

/**
 * Process interrupts on given port
 *
 * Accepts connection, over current and port reset change.
 * @param port port structure
 * @param hub hub representation
 */
void usb_hub_port_process_interrupt(usb_hub_port_t *port)
{
        assert(port);
        port_log(debug2, port, "Interrupt.");

        usb_port_status_t status = 0;
        const errno_t err = usb_hub_get_port_status(port->hub,
            port->port_number, &status);
        if (err != EOK) {
                port_log(error, port, "Failed to get port status: %s.",
                    str_error(err));
                return;
        }

        check_port_change(port, &status, &port_changed_connection,
            USB_HUB_PORT_STATUS_C_CONNECTION,
            USB_HUB_FEATURE_C_PORT_CONNECTION);

        check_port_change(port, &status, &port_changed_overcurrent,
            USB_HUB_PORT_STATUS_C_OC, USB_HUB_FEATURE_C_PORT_OVER_CURRENT);

        check_port_change(port, &status, &port_changed_reset,
            USB_HUB_PORT_STATUS_C_RESET, USB_HUB_FEATURE_C_PORT_RESET);

        if (port->hub->speed <= USB_SPEED_HIGH) {
                check_port_change(port, &status, &port_changed_enabled,
                    USB2_HUB_PORT_STATUS_C_ENABLE,
                    USB2_HUB_FEATURE_C_PORT_ENABLE);
        } else {
                check_port_change(port, &status, &port_changed_reset,
                    USB3_HUB_PORT_STATUS_C_BH_RESET,
                    USB3_HUB_FEATURE_C_BH_PORT_RESET);

                check_port_change(port, &status, NULL,
                    USB3_HUB_PORT_STATUS_C_LINK_STATE,
                    USB3_HUB_FEATURE_C_PORT_LINK_STATE);
        }

        /* Check for changes we ignored */
        if (status & 0xffff0000) {
                port_log(debug, port, "Port status change igored. "
                    "Status: %#08" PRIx32, status);
        }
}

/**
 * @}
 */
/* [<][>][^][v][top][bottom][index][help] */
HelenOS homepage, sources at GitHub
HelenOS sources

root/uspace/drv/bus/usb/usbhub/port.c

DEFINITIONS
