HelenOS sources

root/kernel/arch/ia32/src/smp/smp.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. smp_init
  2. cpu_arch_id_init
  3. kmp
  4. smp_irq_to_pin

/*
 * Copyright (c) 2008 Jakub Jermar
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/** @addtogroup kernel_ia32
 * @{
 */
/** @file
 */

#include <smp/smp.h>
#include <arch/smp/smp.h>
#include <arch/smp/mps.h>
#include <arch/smp/ap.h>
#include <arch/boot/boot.h>
#include <assert.h>
#include <errno.h>
#include <genarch/acpi/acpi.h>
#include <genarch/acpi/madt.h>
#include <config.h>
#include <synch/waitq.h>
#include <arch/pm.h>
#include <halt.h>
#include <panic.h>
#include <arch/asm.h>
#include <mm/page.h>
#include <mm/frame.h>
#include <mm/km.h>
#include <stdlib.h>
#include <mm/as.h>
#include <log.h>
#include <memw.h>
#include <genarch/drivers/i8259/i8259.h>
#include <cpu.h>

#ifdef CONFIG_SMP

static struct smp_config_operations *ops = NULL;

void smp_init(void)
{
        if (acpi_madt) {
                acpi_madt_parse();
                ops = &madt_config_operations;
        }

        if (config.cpu_count == 1) {
                mps_init();
                ops = &mps_config_operations;
        }

        if (config.cpu_count > 1) {
                l_apic = (uint32_t *) km_map((uintptr_t) l_apic, PAGE_SIZE,
                    PAGE_SIZE, PAGE_WRITE | PAGE_NOT_CACHEABLE);
                io_apic = (uint32_t *) km_map((uintptr_t) io_apic, PAGE_SIZE,
                    PAGE_SIZE, PAGE_WRITE | PAGE_NOT_CACHEABLE);
        }
}

static void cpu_arch_id_init(void)
{
        assert(ops != NULL);
        assert(cpus != NULL);

        for (unsigned int i = 0; i < config.cpu_count; ++i) {
                cpus[i].arch.id = ops->cpu_apic_id(i);
        }
}

/*
 * Kernel thread for bringing up application processors. It becomes clear
 * that we need an arrangement like this (AP's being initialized by a kernel
 * thread), for a thread has its dedicated stack. (The stack used during the
 * BSP initialization (prior the very first call to scheduler()) will be used
 * as an initialization stack for each AP.)
 */
void kmp(void *arg __attribute__((unused)))
{
        unsigned int i;

        assert(ops != NULL);

        /*
         * SMP initialized, cpus array allocated. Assign each CPU its
         * physical APIC ID.
         */
        cpu_arch_id_init();

        /*
         * We need to access data in frame 0.
         * We boldly make use of kernel address space mapping.
         */

        /*
         * Set the warm-reset vector to the real-mode address of 4K-aligned ap_boot()
         */
        *((uint16_t *) (PA2KA(0x467 + 0))) =
            (uint16_t) (((uintptr_t) ap_boot) >> 4);  /* segment */
        *((uint16_t *) (PA2KA(0x467 + 2))) = 0;       /* offset */

        /*
         * Save 0xa to address 0xf of the CMOS RAM.
         * BIOS will not do the POST after the INIT signal.
         */
        pio_write_8((ioport8_t *) 0x70, 0xf);
        pio_write_8((ioport8_t *) 0x71, 0xa);

        i8259_disable_irqs(0xffff);
        apic_init();

        for (i = 0; i < config.cpu_count; i++) {
                /*
                 * Skip processors marked unusable.
                 */
                if (!ops->cpu_enabled(i))
                        continue;

                /*
                 * The bootstrap processor is already up.
                 */
                if (ops->cpu_bootstrap(i))
                        continue;

                if (ops->cpu_apic_id(i) == bsp_l_apic) {
                        log(LF_ARCH, LVL_ERROR, "kmp: bad processor entry #%u, "
                            "will not send IPI to myself", i);
                        continue;
                }

                /*
                 * Prepare new GDT for CPU in question.
                 */

                /*
                 * XXX Flag FRAME_LOW_4_GiB was removed temporarily,
                 * it needs to be replaced by a generic fuctionality of
                 * the memory subsystem
                 */
                descriptor_t *gdt_new =
                    (descriptor_t *) malloc(GDT_ITEMS * sizeof(descriptor_t));
                if (!gdt_new)
                        panic("Cannot allocate memory for GDT.");

                memcpy(gdt_new, gdt, GDT_ITEMS * sizeof(descriptor_t));
                memsetb(&gdt_new[TSS_DES], sizeof(descriptor_t), 0);
                protected_ap_gdtr.limit = GDT_ITEMS * sizeof(descriptor_t);
                protected_ap_gdtr.base = KA2PA((uintptr_t) gdt_new);
                gdtr.base = (uintptr_t) gdt_new;

                if (l_apic_send_init_ipi(ops->cpu_apic_id(i))) {
                        /*
                         * There may be just one AP being initialized at
                         * the time. After it comes completely up, it is
                         * supposed to wake us up.
                         */
                        if (semaphore_down_timeout(&ap_completion_semaphore, 1000000) != EOK) {
                                log(LF_ARCH, LVL_NOTE, "%s: waiting for cpu%u "
                                    "(APIC ID = %d) timed out", __FUNCTION__,
                                    i, ops->cpu_apic_id(i));
                        }
                } else
                        log(LF_ARCH, LVL_ERROR, "INIT IPI for l_apic%d failed",
                            ops->cpu_apic_id(i));
        }
}

int smp_irq_to_pin(unsigned int irq)
{
        assert(ops != NULL);
        return ops->irq_to_pin(irq);
}

#endif /* CONFIG_SMP */

/** @}
 */

/* [<][>][^][v][top][bottom][index][help] */
HelenOS homepage, sources at GitHub