HelenOS sources

root/uspace/drv/block/ahci/ahci.c

DEFINITIONS

1. fun_sata_dev
2. dev_ahci_dev
3. get_sata_device_name
4. get_num_blocks
5. get_block_size
6. read_blocks
7. write_blocks
8. ahci_wait_event
9. ahci_identify_device_cmd
10. ahci_identify_packet_device_cmd
11. ahci_identify_device
12. ahci_set_mode_cmd
13. ahci_set_highest_ultra_dma_mode
14. ahci_rb_fpdma_cmd
15. ahci_rb_fpdma
16. ahci_wb_fpdma_cmd
17. ahci_wb_fpdma
18. ahci_interrupt
19. ahci_sata_allocate
20. ahci_sata_hw_start
21. ahci_sata_create
22. ahci_sata_devices_create
23. ahci_ahci_create
24. ahci_ahci_hw_start
25. ahci_dev_add
26. ahci_get_model_name
27. main

/*
 * Copyright (c) 2012 Petr Jerman
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/** @file
 * AHCI SATA driver implementation.
 */

#include <as.h>
#include <errno.h>
#include <stdio.h>
#include <ddf/interrupt.h>
#include <ddf/log.h>
#include <device/hw_res.h>
#include <device/hw_res_parsed.h>
#include <pci_dev_iface.h>
#include <ahci_iface.h>
#include "ahci.h"
#include "ahci_hw.h"
#include "ahci_sata.h"

#define NAME  "ahci"

#define LO(ptr) \
        ((uint32_t) (((uint64_t) ((uintptr_t) (ptr))) & 0xffffffff))

#define HI(ptr) \
        ((uint32_t) (((uint64_t) ((uintptr_t) (ptr))) >> 32))

/** Interrupt pseudocode for a single port
 *
 * The interrupt handling works as follows:
 *
 * 1. Port interrupt status register is read
 *    (stored as arg2).
 * 2. If port interrupt is indicated, then:
 *    3. Port interrupt status register is cleared.
 *    4. Global interrupt status register is read
 *       and cleared (any potential interrupts from
 *       other ports are reasserted automatically).
 *    5. Port number is stored as arg1.
 *    6. The interrupt is accepted.
 *
 */
#define AHCI_PORT_CMDS(port) \
        { \
                /* Read port interrupt status register */ \
                .cmd = CMD_PIO_READ_32, \
                .addr = NULL, \
                .dstarg = 2 \
        }, \
        { \
                /* Check if port asserted interrupt */ \
                .cmd = CMD_PREDICATE, \
                .value = 5, \
                .srcarg = 2, \
        }, \
        { \
                /* Clear port interrupt status register */ \
                .cmd = CMD_PIO_WRITE_A_32, \
                .addr = NULL, \
                .srcarg = 2 \
        }, \
        { \
                /* Read global interrupt status register */ \
                .cmd = CMD_PIO_READ_32, \
                .addr = NULL, \
                .dstarg = 0 \
        }, \
        { \
                /* Clear global interrupt status register */ \
                .cmd = CMD_PIO_WRITE_A_32, \
                .addr = NULL, \
                .srcarg = 0 \
        }, \
        { \
                /* Indicate port interrupt assertion */ \
                .cmd = CMD_LOAD, \
                .value = (port), \
                .dstarg = 1 \
        }, \
        { \
                /* Accept the interrupt */ \
                .cmd = CMD_ACCEPT \
        }

static errno_t get_sata_device_name(ddf_fun_t *, size_t, char *);
static errno_t get_num_blocks(ddf_fun_t *, uint64_t *);
static errno_t get_block_size(ddf_fun_t *, size_t *);
static errno_t read_blocks(ddf_fun_t *, uint64_t, size_t, void *);
static errno_t write_blocks(ddf_fun_t *, uint64_t, size_t, void *);

static errno_t ahci_identify_device(sata_dev_t *);
static errno_t ahci_set_highest_ultra_dma_mode(sata_dev_t *);
static errno_t ahci_rb_fpdma(sata_dev_t *, uintptr_t, uint64_t);
static errno_t ahci_wb_fpdma(sata_dev_t *, uintptr_t, uint64_t);

static void ahci_sata_devices_create(ahci_dev_t *, ddf_dev_t *);
static ahci_dev_t *ahci_ahci_create(ddf_dev_t *);
static void ahci_ahci_hw_start(ahci_dev_t *);

static errno_t ahci_dev_add(ddf_dev_t *);

static void ahci_get_model_name(uint16_t *, char *);

static fibril_mutex_t sata_devices_count_lock;
static int sata_devices_count = 0;

/*
 * AHCI Interface
 */

static ahci_iface_t ahci_interface = {
        .get_sata_device_name = &get_sata_device_name,
        .get_num_blocks = &get_num_blocks,
        .get_block_size = &get_block_size,
        .read_blocks = &read_blocks,
        .write_blocks = &write_blocks
};

static ddf_dev_ops_t ahci_ops = {
        .interfaces[AHCI_DEV_IFACE] = &ahci_interface
};

static driver_ops_t driver_ops = {
        .dev_add = &ahci_dev_add
};

static driver_t ahci_driver = {
        .name = NAME,
        .driver_ops = &driver_ops
};

/** Get SATA structure from DDF function. */
static sata_dev_t *fun_sata_dev(ddf_fun_t *fun)
{
        return ddf_fun_data_get(fun);
}

/** Get AHCI structure from DDF device. */
static ahci_dev_t *dev_ahci_dev(ddf_dev_t *dev)
{
        return ddf_dev_data_get(dev);
}

/** Get SATA device name.
 *
 * @param fun                  Device function handling the call.
 * @param sata_dev_name_length Length of the sata_dev_name buffer.
 * @param sata_dev_name        Buffer for SATA device name.
 *
 * @return EOK.
 *
 */
static errno_t get_sata_device_name(ddf_fun_t *fun,
    size_t sata_dev_name_length, char *sata_dev_name)
{
        sata_dev_t *sata = fun_sata_dev(fun);
        str_cpy(sata_dev_name, sata_dev_name_length, sata->model);
        return EOK;
}

/** Get Number of blocks in SATA device.
 *
 * @param fun    Device function handling the call.
 * @param blocks Return number of blocks in SATA device.
 *
 * @return EOK.
 *
 */
static errno_t get_num_blocks(ddf_fun_t *fun, uint64_t *num_blocks)
{
        sata_dev_t *sata = fun_sata_dev(fun);
        *num_blocks = sata->blocks;
        return EOK;
}

/** Get SATA device block size.
 *
 * @param fun        Device function handling the call.
 * @param block_size Return block size.
 *
 * @return EOK.
 *
 */
static errno_t get_block_size(ddf_fun_t *fun, size_t *block_size)
{
        sata_dev_t *sata = fun_sata_dev(fun);
        *block_size = sata->block_size;
        return EOK;
}

/** Read data blocks into SATA device.
 *
 * @param fun      Device function handling the call.
 * @param blocknum Number of first block.
 * @param count    Number of blocks to read.
 * @param buf      Buffer for data.
 *
 * @return EOK if succeed, error code otherwise
 *
 */
static errno_t read_blocks(ddf_fun_t *fun, uint64_t blocknum,
    size_t count, void *buf)
{
        sata_dev_t *sata = fun_sata_dev(fun);

        uintptr_t phys;
        void *ibuf = AS_AREA_ANY;
        errno_t rc = dmamem_map_anonymous(sata->block_size, DMAMEM_4GiB,
            AS_AREA_READ | AS_AREA_WRITE, 0, &phys, &ibuf);
        if (rc != EOK) {
                ddf_msg(LVL_ERROR, "Cannot allocate read buffer.");
                return rc;
        }

        memset(buf, 0, sata->block_size);

        fibril_mutex_lock(&sata->lock);

        for (size_t cur = 0; cur < count; cur++) {
                rc = ahci_rb_fpdma(sata, phys, blocknum + cur);
                if (rc != EOK)
                        break;

                memcpy((void *) (((uint8_t *) buf) + (sata->block_size * cur)),
                    ibuf, sata->block_size);
        }

        fibril_mutex_unlock(&sata->lock);
        dmamem_unmap_anonymous(ibuf);

        return rc;
}

/** Write data blocks into SATA device.
 *
 * @param fun      Device function handling the call.
 * @param blocknum Number of first block.
 * @param count    Number of blocks to write.
 * @param buf      Buffer with data.
 *
 * @return EOK if succeed, error code otherwise
 *
 */
static errno_t write_blocks(ddf_fun_t *fun, uint64_t blocknum,
    size_t count, void *buf)
{
        sata_dev_t *sata = fun_sata_dev(fun);

        uintptr_t phys;
        void *ibuf = AS_AREA_ANY;
        errno_t rc = dmamem_map_anonymous(sata->block_size, DMAMEM_4GiB,
            AS_AREA_READ | AS_AREA_WRITE, 0, &phys, &ibuf);
        if (rc != EOK) {
                ddf_msg(LVL_ERROR, "Cannot allocate write buffer.");
                return rc;
        }

        fibril_mutex_lock(&sata->lock);

        for (size_t cur = 0; cur < count; cur++) {
                memcpy(ibuf, (void *) (((uint8_t *) buf) + (sata->block_size * cur)),
                    sata->block_size);
                rc = ahci_wb_fpdma(sata, phys, blocknum + cur);
                if (rc != EOK)
                        break;
        }

        fibril_mutex_unlock(&sata->lock);
        dmamem_unmap_anonymous(ibuf);

        return rc;
}

/*
 * AHCI Commands
 */

/** Wait for interrupt event.
 *
 * @param sata SATA device structure.
 *
 * @return Value of interrupt state register.
 *
 */
static ahci_port_is_t ahci_wait_event(sata_dev_t *sata)
{
        fibril_mutex_lock(&sata->event_lock);

        sata->event_pxis = 0;
        while (sata->event_pxis == 0)
                fibril_condvar_wait(&sata->event_condvar, &sata->event_lock);

        ahci_port_is_t pxis = sata->event_pxis;

        if (ahci_port_is_permanent_error(pxis))
                sata->is_invalid_device = true;

        fibril_mutex_unlock(&sata->event_lock);

        return pxis;
}

/** Set AHCI registers for identifying SATA device.
 *
 * @param sata SATA device structure.
 * @param phys Physical address of working buffer.
 *
 */
static void ahci_identify_device_cmd(sata_dev_t *sata, uintptr_t phys)
{
        volatile sata_std_command_frame_t *cmd =
            (sata_std_command_frame_t *) sata->cmd_table;

        cmd->fis_type = SATA_CMD_FIS_TYPE;
        cmd->c = SATA_CMD_FIS_COMMAND_INDICATOR;
        cmd->command = 0xec;
        cmd->features = 0;
        cmd->lba_lower = 0;
        cmd->device = 0;
        cmd->lba_upper = 0;
        cmd->features_upper = 0;
        cmd->count = 0;
        cmd->reserved1 = 0;
        cmd->control = 0;
        cmd->reserved2 = 0;

        volatile ahci_cmd_prdt_t *prdt =
            (ahci_cmd_prdt_t *) (&sata->cmd_table[0x20]);

        prdt->data_address_low = LO(phys);
        prdt->data_address_upper = HI(phys);
        prdt->reserved1 = 0;
        prdt->dbc = SATA_IDENTIFY_DEVICE_BUFFER_LENGTH - 1;
        prdt->reserved2 = 0;
        prdt->ioc = 0;

        sata->cmd_header->prdtl = 1;
        sata->cmd_header->flags =
            AHCI_CMDHDR_FLAGS_CLEAR_BUSY_UPON_OK |
            AHCI_CMDHDR_FLAGS_2DWCMD;
        sata->cmd_header->bytesprocessed = 0;

        /* Run command. */
        sata->port->pxsact |= 1;
        sata->port->pxci |= 1;
}

/** Set AHCI registers for identifying packet SATA device.
 *
 * @param sata SATA device structure.
 * @param phys Physical address of working buffer.
 *
 */
static void ahci_identify_packet_device_cmd(sata_dev_t *sata, uintptr_t phys)
{
        volatile sata_std_command_frame_t *cmd =
            (sata_std_command_frame_t *) sata->cmd_table;

        cmd->fis_type = SATA_CMD_FIS_TYPE;
        cmd->c = SATA_CMD_FIS_COMMAND_INDICATOR;
        cmd->command = 0xa1;
        cmd->features = 0;
        cmd->lba_lower = 0;
        cmd->device = 0;
        cmd->lba_upper = 0;
        cmd->features_upper = 0;
        cmd->count = 0;
        cmd->reserved1 = 0;
        cmd->control = 0;
        cmd->reserved2 = 0;

        volatile ahci_cmd_prdt_t *prdt =
            (ahci_cmd_prdt_t *) (&sata->cmd_table[0x20]);

        prdt->data_address_low = LO(phys);
        prdt->data_address_upper = HI(phys);
        prdt->reserved1 = 0;
        prdt->dbc = SATA_IDENTIFY_DEVICE_BUFFER_LENGTH - 1;
        prdt->reserved2 = 0;
        prdt->ioc = 0;

        sata->cmd_header->prdtl = 1;
        sata->cmd_header->flags =
            AHCI_CMDHDR_FLAGS_CLEAR_BUSY_UPON_OK |
            AHCI_CMDHDR_FLAGS_2DWCMD;
        sata->cmd_header->bytesprocessed = 0;

        /* Run command. */
        sata->port->pxsact |= 1;
        sata->port->pxci |= 1;
}

/** Fill device identification in SATA device structure.
 *
 * @param sata SATA device structure.
 *
 * @return EOK if succeed, error code otherwise.
 *
 */
static errno_t ahci_identify_device(sata_dev_t *sata)
{
        if (sata->is_invalid_device) {
                ddf_msg(LVL_ERROR,
                    "Identify command device on invalid device");
                return EINTR;
        }

        uintptr_t phys;
        sata_identify_data_t *idata = AS_AREA_ANY;
        errno_t rc = dmamem_map_anonymous(SATA_IDENTIFY_DEVICE_BUFFER_LENGTH,
            DMAMEM_4GiB, AS_AREA_READ | AS_AREA_WRITE, 0, &phys,
            (void *) &idata);
        if (rc != EOK) {
                ddf_msg(LVL_ERROR, "Cannot allocate buffer to identify device.");
                return rc;
        }

        memset(idata, 0, SATA_IDENTIFY_DEVICE_BUFFER_LENGTH);

        fibril_mutex_lock(&sata->lock);

        ahci_identify_device_cmd(sata, phys);
        ahci_port_is_t pxis = ahci_wait_event(sata);

        if (sata->is_invalid_device) {
                ddf_msg(LVL_ERROR,
                    "Unrecoverable error during ata identify device");
                goto error;
        }

        if (ahci_port_is_tfes(pxis)) {
                ahci_identify_packet_device_cmd(sata, phys);
                pxis = ahci_wait_event(sata);

                if ((sata->is_invalid_device) || (ahci_port_is_error(pxis))) {
                        ddf_msg(LVL_ERROR,
                            "Unrecoverable error during ata identify packet device");
                        goto error;
                }

                sata->is_packet_device = true;
        }

        ahci_get_model_name(idata->model_name, sata->model);

        /*
         * Due to QEMU limitation (as of 2012-06-22),
         * only NCQ FPDMA mode is supported.
         */
        if ((idata->sata_cap & sata_np_cap_ncq) == 0) {
                ddf_msg(LVL_ERROR, "%s: NCQ must be supported", sata->model);
                goto error;
        }

        uint16_t logsec = idata->physical_logic_sector_size;
        if ((logsec & 0xc000) == 0x4000) {
                /* Length of sector may be larger than 512 B */
                if (logsec & 0x0100) {
                        /* Size of sector is larger than 512 B */
                        ddf_msg(LVL_ERROR,
                            "%s: Sector length other than 512 B not supported",
                            sata->model);
                        goto error;
                }

                if ((logsec & 0x0200) && ((logsec & 0x000f) != 0)) {
                        /* Physical sectors per logical sector is greather than 1 */
                        ddf_msg(LVL_ERROR,
                            "%s: Sector length other than 512 B not supported",
                            sata->model);
                        goto error;
                }
        }

        if (sata->is_packet_device) {
                /*
                 * Due to QEMU limitation (as of 2012-06-22),
                 * only NCQ FPDMA mode supported - block size is
                 * 512 B, not 2048 B!
                 */
                sata->block_size = SATA_DEFAULT_SECTOR_SIZE;
                sata->blocks = 0;
        } else {
                sata->block_size = SATA_DEFAULT_SECTOR_SIZE;

                if ((idata->caps & sata_rd_cap_lba) == 0) {
                        ddf_msg(LVL_ERROR, "%s: LBA for NCQ must be supported",
                            sata->model);
                        goto error;
                } else if ((idata->cmd_set1 & sata_cs1_addr48) == 0) {
                        sata->blocks = (uint32_t) idata->total_lba28_0 |
                            ((uint32_t) idata->total_lba28_1 << 16);
                } else {
                        /* Device supports LBA-48 addressing. */
                        sata->blocks = (uint64_t) idata->total_lba48_0 |
                            ((uint64_t) idata->total_lba48_1 << 16) |
                            ((uint64_t) idata->total_lba48_2 << 32) |
                            ((uint64_t) idata->total_lba48_3 << 48);
                }
        }

        uint8_t udma_mask = idata->udma & 0x007f;
        sata->highest_udma_mode = (uint8_t) -1;
        if (udma_mask == 0) {
                ddf_msg(LVL_ERROR,
                    "%s: UDMA mode for NCQ FPDMA mode must be supported",
                    sata->model);
                goto error;
        } else {
                for (uint8_t i = 0; i < 7; i++) {
                        if (udma_mask & (1 << i))
                                sata->highest_udma_mode = i;
                }
        }

        fibril_mutex_unlock(&sata->lock);
        dmamem_unmap_anonymous(idata);

        return EOK;

error:
        fibril_mutex_unlock(&sata->lock);
        dmamem_unmap_anonymous(idata);

        return EINTR;
}

/** Set AHCI registers for setting SATA device transfer mode.
 *
 * @param sata SATA device structure.
 * @param phys Physical address of working buffer.
 * @param mode Required mode.
 *
 */
static void ahci_set_mode_cmd(sata_dev_t *sata, uintptr_t phys, uint8_t mode)
{
        volatile sata_std_command_frame_t *cmd =
            (sata_std_command_frame_t *) sata->cmd_table;

        cmd->fis_type = SATA_CMD_FIS_TYPE;
        cmd->c = SATA_CMD_FIS_COMMAND_INDICATOR;
        cmd->command = 0xef;
        cmd->features = 0x03;
        cmd->lba_lower = 0;
        cmd->device = 0;
        cmd->lba_upper = 0;
        cmd->features_upper = 0;
        cmd->count = mode;
        cmd->reserved1 = 0;
        cmd->control = 0;
        cmd->reserved2 = 0;

        volatile ahci_cmd_prdt_t *prdt =
            (ahci_cmd_prdt_t *) (&sata->cmd_table[0x20]);

        prdt->data_address_low = LO(phys);
        prdt->data_address_upper = HI(phys);
        prdt->reserved1 = 0;
        prdt->dbc = SATA_SET_FEATURE_BUFFER_LENGTH - 1;
        prdt->reserved2 = 0;
        prdt->ioc = 0;

        sata->cmd_header->prdtl = 1;
        sata->cmd_header->flags =
            AHCI_CMDHDR_FLAGS_CLEAR_BUSY_UPON_OK |
            AHCI_CMDHDR_FLAGS_2DWCMD;
        sata->cmd_header->bytesprocessed = 0;

        /* Run command. */
        sata->port->pxsact |= 1;
        sata->port->pxci |= 1;
}

/** Set highest ultra DMA mode supported by SATA device.
 *
 * @param sata SATA device structure.
 *
 * @return EOK if succeed, error code otherwise
 *
 */
static errno_t ahci_set_highest_ultra_dma_mode(sata_dev_t *sata)
{
        if (sata->is_invalid_device) {
                ddf_msg(LVL_ERROR,
                    "%s: Setting highest UDMA mode on invalid device",
                    sata->model);
                return EINTR;
        }

        if (sata->highest_udma_mode == (uint8_t) -1) {
                ddf_msg(LVL_ERROR,
                    "%s: No AHCI UDMA support.", sata->model);
                return EINTR;
        }

        if (sata->highest_udma_mode > 6) {
                ddf_msg(LVL_ERROR,
                    "%s: Unknown AHCI UDMA mode.", sata->model);
                return EINTR;
        }

        uintptr_t phys;
        sata_identify_data_t *idata = AS_AREA_ANY;
        errno_t rc = dmamem_map_anonymous(SATA_SET_FEATURE_BUFFER_LENGTH,
            DMAMEM_4GiB, AS_AREA_READ | AS_AREA_WRITE, 0, &phys,
            (void *) &idata);
        if (rc != EOK) {
                ddf_msg(LVL_ERROR, "Cannot allocate buffer for device set mode.");
                return rc;
        }

        memset(idata, 0, SATA_SET_FEATURE_BUFFER_LENGTH);

        fibril_mutex_lock(&sata->lock);

        uint8_t mode = 0x40 | (sata->highest_udma_mode & 0x07);
        ahci_set_mode_cmd(sata, phys, mode);
        ahci_port_is_t pxis = ahci_wait_event(sata);

        if (sata->is_invalid_device) {
                ddf_msg(LVL_ERROR,
                    "%s: Unrecoverable error during set highest UDMA mode",
                    sata->model);
                goto error;
        }

        if (ahci_port_is_error(pxis)) {
                ddf_msg(LVL_ERROR,
                    "%s: Error during set highest UDMA mode", sata->model);
                goto error;
        }

        fibril_mutex_unlock(&sata->lock);
        dmamem_unmap_anonymous(idata);

        return EOK;

error:
        fibril_mutex_unlock(&sata->lock);
        dmamem_unmap_anonymous(idata);

        return EINTR;
}

/** Set AHCI registers for reading one sector from the SATA device using FPDMA.
 *
 * @param sata     SATA device structure.
 * @param phys     Physical address of buffer for sector data.
 * @param blocknum Block number to read.
 *
 */
static void ahci_rb_fpdma_cmd(sata_dev_t *sata, uintptr_t phys,
    uint64_t blocknum)
{
        volatile sata_ncq_command_frame_t *cmd =
            (sata_ncq_command_frame_t *) sata->cmd_table;

        cmd->fis_type = SATA_CMD_FIS_TYPE;
        cmd->c = SATA_CMD_FIS_COMMAND_INDICATOR;
        cmd->command = 0x60;
        cmd->tag = 0;
        cmd->control = 0;

        cmd->reserved1 = 0;
        cmd->reserved2 = 0;
        cmd->reserved3 = 0;
        cmd->reserved4 = 0;
        cmd->reserved5 = 0;
        cmd->reserved6 = 0;

        cmd->sector_count_low = 1;
        cmd->sector_count_high = 0;

        cmd->lba0 = blocknum & 0xff;
        cmd->lba1 = (blocknum >> 8) & 0xff;
        cmd->lba2 = (blocknum >> 16) & 0xff;
        cmd->lba3 = (blocknum >> 24) & 0xff;
        cmd->lba4 = (blocknum >> 32) & 0xff;
        cmd->lba5 = (blocknum >> 40) & 0xff;

        volatile ahci_cmd_prdt_t *prdt =
            (ahci_cmd_prdt_t *) (&sata->cmd_table[0x20]);

        prdt->data_address_low = LO(phys);
        prdt->data_address_upper = HI(phys);
        prdt->reserved1 = 0;
        prdt->dbc = sata->block_size - 1;
        prdt->reserved2 = 0;
        prdt->ioc = 0;

        sata->cmd_header->prdtl = 1;
        sata->cmd_header->flags =
            AHCI_CMDHDR_FLAGS_CLEAR_BUSY_UPON_OK |
            AHCI_CMDHDR_FLAGS_5DWCMD;
        sata->cmd_header->bytesprocessed = 0;

        sata->port->pxsact |= 1;
        sata->port->pxci |= 1;
}

/** Read one sector from the SATA device using FPDMA.
 *
 * @param sata     SATA device structure.
 * @param phys     Physical address of buffer for sector data.
 * @param blocknum Block number to read.
 *
 * @return EOK if succeed, error code otherwise
 *
 */
static errno_t ahci_rb_fpdma(sata_dev_t *sata, uintptr_t phys, uint64_t blocknum)
{
        if (sata->is_invalid_device) {
                ddf_msg(LVL_ERROR,
                    "%s: FPDMA read from invalid device", sata->model);
                return EINTR;
        }

        ahci_rb_fpdma_cmd(sata, phys, blocknum);
        ahci_port_is_t pxis = ahci_wait_event(sata);

        if ((sata->is_invalid_device) || (ahci_port_is_error(pxis))) {
                ddf_msg(LVL_ERROR,
                    "%s: Unrecoverable error during FPDMA read", sata->model);
                return EINTR;
        }

        return EOK;
}

/** Set AHCI registers for writing one sector to the SATA device, use FPDMA.
 *
 * @param sata     SATA device structure.
 * @param phys     Physical address of buffer with sector data.
 * @param blocknum Block number to write.
 *
 * @return EOK if succeed, error code otherwise
 *
 */
static void ahci_wb_fpdma_cmd(sata_dev_t *sata, uintptr_t phys,
    uint64_t blocknum)
{
        volatile sata_ncq_command_frame_t *cmd =
            (sata_ncq_command_frame_t *) sata->cmd_table;

        cmd->fis_type = SATA_CMD_FIS_TYPE;
        cmd->c = SATA_CMD_FIS_COMMAND_INDICATOR;
        cmd->command = 0x61;
        cmd->tag = 0;
        cmd->control = 0;

        cmd->reserved1 = 0;
        cmd->reserved2 = 0;
        cmd->reserved3 = 0;
        cmd->reserved4 = 0;
        cmd->reserved5 = 0;
        cmd->reserved6 = 0;

        cmd->sector_count_low = 1;
        cmd->sector_count_high = 0;

        cmd->lba0 = blocknum & 0xff;
        cmd->lba1 = (blocknum >> 8) & 0xff;
        cmd->lba2 = (blocknum >> 16) & 0xff;
        cmd->lba3 = (blocknum >> 24) & 0xff;
        cmd->lba4 = (blocknum >> 32) & 0xff;
        cmd->lba5 = (blocknum >> 40) & 0xff;

        volatile ahci_cmd_prdt_t *prdt =
            (ahci_cmd_prdt_t *) (&sata->cmd_table[0x20]);

        prdt->data_address_low = LO(phys);
        prdt->data_address_upper = HI(phys);
        prdt->reserved1 = 0;
        prdt->dbc = sata->block_size - 1;
        prdt->reserved2 = 0;
        prdt->ioc = 0;

        sata->cmd_header->prdtl = 1;
        sata->cmd_header->flags =
            AHCI_CMDHDR_FLAGS_CLEAR_BUSY_UPON_OK |
            AHCI_CMDHDR_FLAGS_WRITE |
            AHCI_CMDHDR_FLAGS_5DWCMD;
        sata->cmd_header->bytesprocessed = 0;

        sata->port->pxsact |= 1;
        sata->port->pxci |= 1;
}

/** Write one sector into the SATA device, use FPDMA.
 *
 * @param sata     SATA device structure.
 * @param phys     Physical address of buffer with sector data.
 * @param blocknum Block number to write.
 *
 * @return EOK if succeed, error code otherwise
 *
 */
static errno_t ahci_wb_fpdma(sata_dev_t *sata, uintptr_t phys, uint64_t blocknum)
{
        if (sata->is_invalid_device) {
                ddf_msg(LVL_ERROR,
                    "%s: FPDMA write to invalid device", sata->model);
                return EINTR;
        }

        ahci_wb_fpdma_cmd(sata, phys, blocknum);
        ahci_port_is_t pxis = ahci_wait_event(sata);

        if ((sata->is_invalid_device) || (ahci_port_is_error(pxis))) {
                ddf_msg(LVL_ERROR,
                    "%s: Unrecoverable error during FPDMA write", sata->model);
                return EINTR;
        }

        return EOK;
}

/*
 * Interrupts handling
 */

static irq_pio_range_t ahci_ranges[] = {
        {
                .base = 0,
                .size = 0,
        }
};

static irq_cmd_t ahci_cmds[] = {
        AHCI_PORT_CMDS(0),
        AHCI_PORT_CMDS(1),
        AHCI_PORT_CMDS(2),
        AHCI_PORT_CMDS(3),
        AHCI_PORT_CMDS(4),
        AHCI_PORT_CMDS(5),
        AHCI_PORT_CMDS(6),
        AHCI_PORT_CMDS(7),
        AHCI_PORT_CMDS(8),
        AHCI_PORT_CMDS(9),
        AHCI_PORT_CMDS(10),
        AHCI_PORT_CMDS(11),
        AHCI_PORT_CMDS(12),
        AHCI_PORT_CMDS(13),
        AHCI_PORT_CMDS(14),
        AHCI_PORT_CMDS(15),
        AHCI_PORT_CMDS(16),
        AHCI_PORT_CMDS(17),
        AHCI_PORT_CMDS(18),
        AHCI_PORT_CMDS(19),
        AHCI_PORT_CMDS(20),
        AHCI_PORT_CMDS(21),
        AHCI_PORT_CMDS(22),
        AHCI_PORT_CMDS(23),
        AHCI_PORT_CMDS(24),
        AHCI_PORT_CMDS(25),
        AHCI_PORT_CMDS(26),
        AHCI_PORT_CMDS(27),
        AHCI_PORT_CMDS(28),
        AHCI_PORT_CMDS(29),
        AHCI_PORT_CMDS(30),
        AHCI_PORT_CMDS(31)
};

/** AHCI interrupt handler.
 *
 * @param icall The IPC call structure.
 * @param dev   DDF device structure.
 *
 */
static void ahci_interrupt(ipc_call_t *icall, ddf_dev_t *dev)
{
        ahci_dev_t *ahci = dev_ahci_dev(dev);
        unsigned int port = ipc_get_arg1(icall);
        ahci_port_is_t pxis = ipc_get_arg2(icall);

        if (port >= AHCI_MAX_PORTS)
                return;

        sata_dev_t *sata = (sata_dev_t *) ahci->sata_devs[port];
        if (sata == NULL)
                return;

        /* Evaluate port event */
        if ((ahci_port_is_end_of_operation(pxis)) ||
            (ahci_port_is_error(pxis))) {
                fibril_mutex_lock(&sata->event_lock);

                sata->event_pxis = pxis;
                fibril_condvar_signal(&sata->event_condvar);

                fibril_mutex_unlock(&sata->event_lock);
        }
}

/*
 * AHCI and SATA device creating and initializing routines
 */

/** Allocate SATA device structure with buffers for hardware.
 *
 * @param port AHCI port structure
 *
 * @return SATA device structure if succeed, NULL otherwise.
 *
 */
static sata_dev_t *ahci_sata_allocate(ahci_dev_t *ahci, volatile ahci_port_t *port)
{
        size_t size = 4096;
        uintptr_t phys = 0;
        void *virt_fb = AS_AREA_ANY;
        void *virt_cmd = AS_AREA_ANY;
        void *virt_table = AS_AREA_ANY;
        ddf_fun_t *fun;

        fun = ddf_fun_create(ahci->dev, fun_exposed, NULL);

        sata_dev_t *sata = ddf_fun_data_alloc(fun, sizeof(sata_dev_t));
        if (sata == NULL)
                return NULL;

        sata->fun = fun;
        sata->port = port;

        /* Allocate and init retfis structure. */
        errno_t rc = dmamem_map_anonymous(size, DMAMEM_4GiB,
            AS_AREA_READ | AS_AREA_WRITE, 0, &phys, &virt_fb);
        if (rc != EOK)
                goto error_retfis;

        memset(virt_fb, 0, size);
        sata->port->pxfbu = HI(phys);
        sata->port->pxfb = LO(phys);

        /* Allocate and init command header structure. */
        rc = dmamem_map_anonymous(size, DMAMEM_4GiB,
            AS_AREA_READ | AS_AREA_WRITE, 0, &phys, &virt_cmd);
        if (rc != EOK)
                goto error_cmd;

        memset(virt_cmd, 0, size);
        sata->port->pxclbu = HI(phys);
        sata->port->pxclb = LO(phys);
        sata->cmd_header = (ahci_cmdhdr_t *) virt_cmd;

        /* Allocate and init command table structure. */
        rc = dmamem_map_anonymous(size, DMAMEM_4GiB,
            AS_AREA_READ | AS_AREA_WRITE, 0, &phys, &virt_table);
        if (rc != EOK)
                goto error_table;

        memset(virt_table, 0, size);
        sata->cmd_header->cmdtableu = HI(phys);
        sata->cmd_header->cmdtable = LO(phys);
        sata->cmd_table = (uint32_t *) virt_table;

        return sata;

error_table:
        dmamem_unmap(virt_cmd, size);
error_cmd:
        dmamem_unmap(virt_fb, size);
error_retfis:
        free(sata);
        return NULL;
}

/** Initialize and start SATA hardware device.
 *
 * @param sata SATA device structure.
 *
 */
static void ahci_sata_hw_start(sata_dev_t *sata)
{
        ahci_port_cmd_t pxcmd;

        pxcmd.u32 = sata->port->pxcmd;

        /* Frame receiver disabled. */
        pxcmd.fre = 0;

        /* Disable process the command list. */
        pxcmd.st = 0;

        sata->port->pxcmd = pxcmd.u32;

        /* Clear interrupt status. */
        sata->port->pxis = 0xffffffff;

        /* Clear error status. */
        sata->port->pxserr = 0xffffffff;

        /* Enable all interrupts. */
        sata->port->pxie = 0xffffffff;

        /* Frame receiver enabled. */
        pxcmd.fre = 1;

        /* Enable process the command list. */
        pxcmd.st = 1;

        sata->port->pxcmd = pxcmd.u32;
}

/** Create and initialize connected SATA structure device
 *
 * @param ahci     AHCI device structure.
 * @param dev      DDF device structure.
 * @param port     AHCI port structure.
 * @param port_num Number of AHCI port with existing SATA device.
 *
 * @return EOK if succeed, error code otherwise.
 *
 */
static errno_t ahci_sata_create(ahci_dev_t *ahci, ddf_dev_t *dev,
    volatile ahci_port_t *port, unsigned int port_num)
{
        ddf_fun_t *fun = NULL;
        errno_t rc;

        sata_dev_t *sata = ahci_sata_allocate(ahci, port);
        if (sata == NULL)
                return EINTR;

        /* Set pointers between SATA and AHCI structures. */
        sata->ahci = ahci;
        sata->port_num = port_num;
        ahci->sata_devs[port_num] = sata;

        /* Initialize synchronization structures */
        fibril_mutex_initialize(&sata->lock);
        fibril_mutex_initialize(&sata->event_lock);
        fibril_condvar_initialize(&sata->event_condvar);

        ahci_sata_hw_start(sata);

        /* Identify device. */
        if (ahci_identify_device(sata) != EOK)
                goto error;

        /* Set required UDMA mode */
        if (ahci_set_highest_ultra_dma_mode(sata) != EOK)
                goto error;

        /* Add device to the system */
        char sata_dev_name[16];
        snprintf(sata_dev_name, 16, "ahci_%u", sata_devices_count);

        fibril_mutex_lock(&sata_devices_count_lock);
        sata_devices_count++;
        fibril_mutex_unlock(&sata_devices_count_lock);

        rc = ddf_fun_set_name(sata->fun, sata_dev_name);
        if (rc != EOK) {
                ddf_msg(LVL_ERROR, "Failed setting function name.");
                goto error;
        }

        ddf_fun_set_ops(fun, &ahci_ops);

        rc = ddf_fun_bind(fun);
        if (rc != EOK) {
                ddf_msg(LVL_ERROR, "Failed binding function.");
                goto error;
        }

        return EOK;

error:
        sata->is_invalid_device = true;
        if (fun != NULL)
                ddf_fun_destroy(fun);

        return EINTR;
}

/** Create and initialize all SATA structure devices for connected SATA drives.
 *
 * @param ahci AHCI device structure.
 * @param dev  DDF device structure.
 *
 */
static void ahci_sata_devices_create(ahci_dev_t *ahci, ddf_dev_t *dev)
{
        for (unsigned int port_num = 0; port_num < AHCI_MAX_PORTS; port_num++) {
                /* Active ports only */
                if (!(ahci->memregs->ghc.pi & (1 << port_num)))
                        continue;

                volatile ahci_port_t *port = ahci->memregs->ports + port_num;

                /* Active devices only */
                ahci_port_ssts_t pxssts;
                pxssts.u32 = port->pxssts;
                if (pxssts.det != AHCI_PORT_SSTS_DET_ACTIVE)
                        continue;

                ahci_sata_create(ahci, dev, port, port_num);
        }
}

/** Create AHCI device structure, intialize it and register interrupt routine.
 *
 * @param dev DDF device structure.
 *
 * @return AHCI device structure if succeed, NULL otherwise.
 *
 */
static ahci_dev_t *ahci_ahci_create(ddf_dev_t *dev)
{
        ahci_dev_t *ahci = ddf_dev_data_alloc(dev, sizeof(ahci_dev_t));
        if (!ahci)
                return NULL;

        /* Connect to parent device */
        ahci->parent_sess = ddf_dev_parent_sess_get(dev);
        if (ahci->parent_sess == NULL)
                return NULL;

        ahci->dev = dev;

        hw_res_list_parsed_t hw_res_parsed;
        hw_res_list_parsed_init(&hw_res_parsed);
        if (hw_res_get_list_parsed(ahci->parent_sess, &hw_res_parsed, 0) != EOK)
                goto error_get_res_parsed;

        /* Map AHCI registers. */
        ahci->memregs = AS_AREA_ANY;

        physmem_map(RNGABS(hw_res_parsed.mem_ranges.ranges[0]),
            AHCI_MEMREGS_PAGES_COUNT, AS_AREA_READ | AS_AREA_WRITE,
            (void *) &ahci->memregs);
        if (ahci->memregs == NULL)
                goto error_map_registers;

        /* Register interrupt handler */
        ahci_ranges[0].base = RNGABS(hw_res_parsed.mem_ranges.ranges[0]);
        ahci_ranges[0].size = sizeof(ahci_memregs_t);

        for (unsigned int port = 0; port < AHCI_MAX_PORTS; port++) {
                size_t base = port * 7;

                ahci_cmds[base].addr =
                    ((uint32_t *) RNGABSPTR(hw_res_parsed.mem_ranges.ranges[0])) +
                    AHCI_PORTS_REGISTERS_OFFSET + port * AHCI_PORT_REGISTERS_SIZE +
                    AHCI_PORT_IS_REGISTER_OFFSET;
                ahci_cmds[base + 2].addr = ahci_cmds[base].addr;

                ahci_cmds[base + 3].addr =
                    ((uint32_t *) RNGABSPTR(hw_res_parsed.mem_ranges.ranges[0])) +
                    AHCI_GHC_IS_REGISTER_OFFSET;
                ahci_cmds[base + 4].addr = ahci_cmds[base + 3].addr;
        }

        irq_code_t ct;
        ct.cmdcount = sizeof(ahci_cmds) / sizeof(irq_cmd_t);
        ct.cmds = ahci_cmds;
        ct.rangecount = sizeof(ahci_ranges) / sizeof(irq_pio_range_t);
        ct.ranges = ahci_ranges;

        cap_irq_handle_t irq_cap;
        errno_t rc = register_interrupt_handler(dev,
            hw_res_parsed.irqs.irqs[0], ahci_interrupt, &ct, &irq_cap);
        if (rc != EOK) {
                ddf_msg(LVL_ERROR, "Failed registering interrupt handler.");
                goto error_register_interrupt_handler;
        }

        rc = hw_res_enable_interrupt(ahci->parent_sess,
            hw_res_parsed.irqs.irqs[0]);
        if (rc != EOK) {
                ddf_msg(LVL_ERROR, "Failed enable interupt.");
                goto error_enable_interrupt;
        }

        hw_res_list_parsed_clean(&hw_res_parsed);
        return ahci;

error_enable_interrupt:
        unregister_interrupt_handler(dev, irq_cap);

error_register_interrupt_handler:
        // FIXME: unmap physical memory

error_map_registers:
        hw_res_list_parsed_clean(&hw_res_parsed);

error_get_res_parsed:
        free(ahci);
        return NULL;
}

/** Initialize and start AHCI hardware device.
 *
 * @param ahci AHCI device.
 *
 */
static void ahci_ahci_hw_start(ahci_dev_t *ahci)
{
        /* Disable command completion coalescing feature */
        ahci_ghc_ccc_ctl_t ccc;

        ccc.u32 = ahci->memregs->ghc.ccc_ctl;
        ccc.en = 0;
        ahci->memregs->ghc.ccc_ctl = ccc.u32;

        /* Set master latency timer. */
        pci_config_space_write_8(ahci->parent_sess, AHCI_PCI_MLT, 32);

        /* Enable PCI interrupt and bus mastering */
        ahci_pcireg_cmd_t cmd;

        pci_config_space_read_16(ahci->parent_sess, AHCI_PCI_CMD, &cmd.u16);
        cmd.id = 0;
        cmd.bme = 1;
        pci_config_space_write_16(ahci->parent_sess, AHCI_PCI_CMD, cmd.u16);

        /* Enable AHCI and interrupt. */
        ahci->memregs->ghc.ghc = AHCI_GHC_GHC_AE | AHCI_GHC_GHC_IE;
}

/** AHCI device driver initialization
 *
 * Create and initialize all SATA structure devices for connected
 * SATA drives.
 *
 * @param dev DDF device structure.
 *
 * @return EOK if succeed, error code otherwise.
 *
 */
static errno_t ahci_dev_add(ddf_dev_t *dev)
{
        ahci_dev_t *ahci = ahci_ahci_create(dev);
        if (ahci == NULL)
                goto error;

        /* Start AHCI hardware. */
        ahci_ahci_hw_start(ahci);

        /* Create device structures for sata devices attached to AHCI. */
        ahci_sata_devices_create(ahci, dev);

        return EOK;

error:
        return EINTR;
}

/*
 * Helpers and utilities
 */

/** Convert SATA model name
 *
 * Convert SATA model name from machine format returned by
 * identify device command to human readable form.
 *
 * @param src Source buffer with device name in machine format.
 * @param dst Buffer for human readable string, minimum size is 41 chars.
 *
 */
static void ahci_get_model_name(uint16_t *src, char *dst)
{
        uint8_t model[40];
        memset(model, 0, 40);

        for (unsigned int i = 0; i < 20; i++) {
                uint16_t w = src[i];
                model[2 * i] = w >> 8;
                model[2 * i + 1] = w & 0x00ff;
        }

        uint32_t len = 40;
        while ((len > 0) && (model[len - 1] == 0x20))
                len--;

        size_t pos = 0;
        for (unsigned int i = 0; i < len; i++) {
                uint8_t c = model[i];
                if (c >= 0x80)
                        c = '?';

                chr_encode(c, dst, &pos, 40);
        }

        dst[pos] = '\0';
}

/*
 * AHCI Main routine
 */

int main(int argc, char *argv[])
{
        printf("%s: HelenOS AHCI device driver\n", NAME);
        ddf_log_init(NAME);
        fibril_mutex_initialize(&sata_devices_count_lock);
        return ddf_driver_main(&ahci_driver);
}