HelenOS sources

/* [<][>][^][v][top][bottom][index][help] */
This source file includes following definitions.
on_state_change
req_on_status_change_pipe
req_clear_hub_feature
req_clear_port_feature
req_get_bus_state
req_get_descriptor
req_get_hub_status
req_get_port_status
req_set_hub_feature
req_set_port_feature
/*
 * Copyright (c) 2010 Vojtech Horky
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/** @addtogroup drvusbvhc
 * @{
 */
/** @file
 * @brief Virtual USB hub operations.
 */

#include <errno.h>
#include <usb/classes/hub.h>
#include <usbvirt/device.h>
#include "virthub.h"
#include "hub.h"

/** Callback when device changes states. */
static void on_state_change(usbvirt_device_t *dev,
    usbvirt_device_state_t old_state, usbvirt_device_state_t new_state)
{
        hub_t *hub = (hub_t *)dev->device_data;

        hub_acquire(hub);

        switch (new_state) {
        case USBVIRT_STATE_CONFIGURED:
                hub_set_port_state_all(hub, HUB_PORT_STATE_POWERED_OFF);
                break;
        case USBVIRT_STATE_ADDRESS:
                hub_set_port_state_all(hub, HUB_PORT_STATE_NOT_CONFIGURED);
                break;
        default:
                break;
        }

        hub_release(hub);
}

/** Callback for data request. */
static errno_t req_on_status_change_pipe(usbvirt_device_t *dev,
    usb_endpoint_t endpoint, usb_transfer_type_t tr_type,
    void *buffer, size_t buffer_size, size_t *actual_size)
{
        if (endpoint != HUB_STATUS_CHANGE_PIPE) {
                return ESTALL;
        }
        if (tr_type != USB_TRANSFER_INTERRUPT) {
                return ESTALL;
        }

        hub_t *hub = dev->device_data;

        hub_acquire(hub);

        if (!hub->signal_changes) {
                hub_release(hub);

                return ENAK;
        }

        uint8_t change_map = hub_get_status_change_bitmap(hub);

        uint8_t *b = (uint8_t *) buffer;
        if (buffer_size > 0) {
                *b = change_map;
                *actual_size = 1;
        } else {
                *actual_size = 0;
        }

        hub->signal_changes = false;

        hub_release(hub);

        return EOK;
}

/** Handle ClearHubFeature request.
 *
 * @param dev Virtual device representing the hub.
 * @param request The SETUP packet of the control request.
 * @param data Extra data (when DATA stage present).
 * @return Error code.
 */
static errno_t req_clear_hub_feature(usbvirt_device_t *dev,
    const usb_device_request_setup_packet_t *request, uint8_t *data,
    size_t *act_size)
{
        return ENOTSUP;
}

/** Handle ClearPortFeature request.
 *
 * @param dev Virtual device representing the hub.
 * @param request The SETUP packet of the control request.
 * @param data Extra data (when DATA stage present).
 * @return Error code.
 */
static errno_t req_clear_port_feature(usbvirt_device_t *dev,
    const usb_device_request_setup_packet_t *request, uint8_t *data,
    size_t *act_size)
{
        errno_t rc;
        size_t port = request->index - 1;
        usb_hub_class_feature_t feature = request->value;
        hub_t *hub = (hub_t *) dev->device_data;

        hub_acquire(hub);

        hub_port_state_t port_state = hub_get_port_state(hub, port);

        switch (feature) {
        case USB2_HUB_FEATURE_PORT_ENABLE:
                if ((port_state != HUB_PORT_STATE_NOT_CONFIGURED) &&
                    (port_state != HUB_PORT_STATE_POWERED_OFF)) {
                        hub_set_port_state(hub, port, HUB_PORT_STATE_DISABLED);
                }
                rc = EOK;
                break;

        case USB2_HUB_FEATURE_PORT_SUSPEND:
                if (port_state != HUB_PORT_STATE_SUSPENDED) {
                        rc = EOK;
                        break;
                }
                hub_set_port_state(hub, port, HUB_PORT_STATE_RESUMING);
                rc = EOK;
                break;

        case USB_HUB_FEATURE_PORT_POWER:
                if (port_state != HUB_PORT_STATE_NOT_CONFIGURED) {
                        hub_set_port_state(hub, port, HUB_PORT_STATE_POWERED_OFF);
                }
                rc = EOK;
                break;

        case USB_HUB_FEATURE_C_PORT_CONNECTION:
                hub_clear_port_status_change(hub, port, HUB_STATUS_C_PORT_CONNECTION);
                rc = EOK;
                break;

        case USB2_HUB_FEATURE_C_PORT_ENABLE:
                hub_clear_port_status_change(hub, port, HUB_STATUS_C_PORT_ENABLE);
                rc = EOK;
                break;

        case USB2_HUB_FEATURE_C_PORT_SUSPEND:
                hub_clear_port_status_change(hub, port, HUB_STATUS_C_PORT_SUSPEND);
                rc = EOK;
                break;

        case USB_HUB_FEATURE_C_PORT_OVER_CURRENT:
                hub_clear_port_status_change(hub, port, HUB_STATUS_C_PORT_OVER_CURRENT);
                rc = EOK;
                break;

        case USB_HUB_FEATURE_C_PORT_RESET:
                hub_clear_port_status_change(hub, port, HUB_STATUS_C_PORT_RESET);
                rc = EOK;
                break;

        default:
                rc = ENOTSUP;
                break;
        }

        hub_release(hub);

        return rc;
}

/** Handle GetBusState request.
 *
 * @param dev Virtual device representing the hub.
 * @param request The SETUP packet of the control request.
 * @param data Extra data (when DATA stage present).
 * @return Error code.
 */
static errno_t req_get_bus_state(usbvirt_device_t *dev,
    const usb_device_request_setup_packet_t *request, uint8_t *data,
    size_t *act_size)
{
        return ENOTSUP;
}

/** Handle GetDescriptor request.
 *
 * @param dev Virtual device representing the hub.
 * @param request The SETUP packet of the control request.
 * @param data Extra data (when DATA stage present).
 * @return Error code.
 */
static errno_t req_get_descriptor(usbvirt_device_t *dev,
    const usb_device_request_setup_packet_t *request, uint8_t *data,
    size_t *act_size)
{
        if (request->value_high == USB_DESCTYPE_HUB) {
                usbvirt_control_reply_helper(request, data, act_size,
                    &hub_descriptor, hub_descriptor.length);

                return EOK;
        }
        /* Let the framework handle all the rest. */
        return EFORWARD;
}

/** Handle GetHubStatus request.
 *
 * @param dev Virtual device representing the hub.
 * @param request The SETUP packet of the control request.
 * @param data Extra data (when DATA stage present).
 * @return Error code.
 */
static errno_t req_get_hub_status(usbvirt_device_t *dev,
    const usb_device_request_setup_packet_t *request, uint8_t *data,
    size_t *act_size)
{
        uint32_t hub_status = 0;

        usbvirt_control_reply_helper(request, data, act_size,
            &hub_status, sizeof(hub_status));

        return EOK;
}

/** Handle GetPortStatus request.
 *
 * @param dev Virtual device representing the hub.
 * @param request The SETUP packet of the control request.
 * @param data Extra data (when DATA stage present).
 * @return Error code.
 */
static errno_t req_get_port_status(usbvirt_device_t *dev,
    const usb_device_request_setup_packet_t *request, uint8_t *data,
    size_t *act_size)
{
        hub_t *hub = (hub_t *) dev->device_data;

        hub_acquire(hub);

        uint32_t status = hub_get_port_status(hub, request->index - 1);

        hub_release(hub);

        usbvirt_control_reply_helper(request, data, act_size,
            &status, sizeof(status));

        return EOK;
}

/** Handle SetHubFeature request.
 *
 * @param dev Virtual device representing the hub.
 * @param request The SETUP packet of the control request.
 * @param data Extra data (when DATA stage present).
 * @return Error code.
 */
static errno_t req_set_hub_feature(usbvirt_device_t *dev,
    const usb_device_request_setup_packet_t *request, uint8_t *data,
    size_t *act_size)
{
        return ENOTSUP;
}

/** Handle SetPortFeature request.
 *
 * @param dev Virtual device representing the hub.
 * @param request The SETUP packet of the control request.
 * @param data Extra data (when DATA stage present).
 * @return Error code.
 */
static errno_t req_set_port_feature(usbvirt_device_t *dev,
    const usb_device_request_setup_packet_t *request, uint8_t *data,
    size_t *act_size)
{
        errno_t rc = ENOTSUP;
        size_t port = request->index - 1;
        usb_hub_class_feature_t feature = request->value;
        hub_t *hub = (hub_t *) dev->device_data;

        hub_acquire(hub);

        hub_port_state_t port_state = hub_get_port_state(hub, port);

        switch (feature) {
        case USB_HUB_FEATURE_PORT_RESET:
                if (port_state != HUB_PORT_STATE_POWERED_OFF) {
                        hub_set_port_state(hub, port, HUB_PORT_STATE_RESETTING);
                }
                rc = EOK;
                break;

        case USB2_HUB_FEATURE_PORT_SUSPEND:
                if (port_state == HUB_PORT_STATE_ENABLED) {
                        hub_set_port_state(hub, port, HUB_PORT_STATE_SUSPENDED);
                }
                rc = EOK;
                break;

        case USB_HUB_FEATURE_PORT_POWER:
                if (port_state == HUB_PORT_STATE_POWERED_OFF) {
                        hub_set_port_state(hub, port, HUB_PORT_STATE_DISCONNECTED);
                }
                rc = EOK;
                break;

        default:
                break;
        }

        hub_release(hub);

        return rc;
}

/** Recipient: other. */
#define REC_OTHER USB_REQUEST_RECIPIENT_OTHER
/** Recipient: device. */
#define REC_DEVICE USB_REQUEST_RECIPIENT_DEVICE

/** Hub operations on control endpoint zero. */
static usbvirt_control_request_handler_t endpoint_zero_handlers[] = {
        {
                STD_REQ_IN(USB_REQUEST_RECIPIENT_DEVICE, USB_DEVREQ_GET_DESCRIPTOR),
                .name = "GetStdDescriptor",
                .callback = req_get_descriptor
        },
        {
                CLASS_REQ_IN(REC_DEVICE, USB_DEVREQ_GET_DESCRIPTOR),
                .name = "GetClassDescriptor",
                .callback = req_get_descriptor
        },
        {
                CLASS_REQ_IN(REC_OTHER, USB_HUB_REQUEST_GET_STATUS),
                .name = "GetPortStatus",
                .callback = req_get_port_status
        },
        {
                CLASS_REQ_OUT(REC_DEVICE, USB_HUB_REQUEST_CLEAR_FEATURE),
                .name = "ClearHubFeature",
                .callback = req_clear_hub_feature
        },
        {
                CLASS_REQ_OUT(REC_OTHER, USB_HUB_REQUEST_CLEAR_FEATURE),
                .name = "ClearPortFeature",
                .callback = req_clear_port_feature
        },
        {
                CLASS_REQ_IN(REC_OTHER, USB_HUB_REQUEST_GET_STATE),
                .name = "GetBusState",
                .callback = req_get_bus_state
        },
        {
                CLASS_REQ_IN(REC_DEVICE, USB_HUB_REQUEST_GET_DESCRIPTOR),
                .name = "GetHubDescriptor",
                .callback = req_get_descriptor
        },
        {
                CLASS_REQ_IN(REC_DEVICE, USB_HUB_REQUEST_GET_STATUS),
                .name = "GetHubStatus",
                .callback = req_get_hub_status
        },
        {
                CLASS_REQ_IN(REC_OTHER, USB_HUB_REQUEST_GET_STATUS),
                .name = "GetPortStatus",
                .callback = req_get_port_status
        },
        {
                CLASS_REQ_OUT(REC_DEVICE, USB_HUB_REQUEST_SET_FEATURE),
                .name = "SetHubFeature",
                .callback = req_set_hub_feature
        },
        {
                CLASS_REQ_OUT(REC_OTHER, USB_HUB_REQUEST_SET_FEATURE),
                .name = "SetPortFeature",
                .callback = req_set_port_feature
        },
        {
                .callback = NULL
        }
};

/** Hub operations. */
usbvirt_device_ops_t hub_ops = {
        .control = endpoint_zero_handlers,
        .data_in[HUB_STATUS_CHANGE_PIPE] = req_on_status_change_pipe,
        .state_changed = on_state_change,
};

/**
 * @}
 */
/* [<][>][^][v][top][bottom][index][help] */
HelenOS homepage, sources at GitHub
HelenOS sources

root/uspace/drv/bus/usb/vhc/hub/virthubops.c

DEFINITIONS
