HelenOS sources

root/kernel/genarch/src/drivers/s3c24xx/uart.c

DEFINITIONS

1. s3c24xx_uart_sendb
2. s3c24xx_uart_putuchar
3. s3c24xx_uart_claim
4. s3c24xx_uart_irq_handler
5. s3c24xx_uart_init
6. s3c24xx_uart_input_wire

/*
 * Copyright (c) 2009 Martin Decky
 * Copyright (c) 2010 Jiri Svoboda
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/** @addtogroup kernel_genarch
 * @{
 */
/**
 * @file
 * @brief Samsung S3C24xx on-chip UART driver.
 *
 * This UART is present on the Samsung S3C24xx CPU (on the gta02 platform).
 */

#include <assert.h>
#include <genarch/drivers/s3c24xx/uart.h>
#include <console/chardev.h>
#include <console/console.h>
#include <arch/asm.h>
#include <stdlib.h>
#include <mm/page.h>
#include <mm/km.h>
#include <sysinfo/sysinfo.h>
#include <str.h>

static void s3c24xx_uart_sendb(outdev_t *dev, uint8_t byte)
{
        s3c24xx_uart_t *uart =
            (s3c24xx_uart_t *) dev->data;

        /* Wait for space becoming available in Tx FIFO. */
        while ((pio_read_32(&uart->io->ufstat) & S3C24XX_UFSTAT_TX_FULL) != 0)
                ;

        pio_write_32(&uart->io->utxh, byte);
}

static void s3c24xx_uart_putuchar(outdev_t *dev, char32_t ch)
{
        s3c24xx_uart_t *uart =
            (s3c24xx_uart_t *) dev->data;

        if ((!uart->parea.mapped) || (console_override)) {
                if (!ascii_check(ch)) {
                        s3c24xx_uart_sendb(dev, U_SPECIAL);
                } else {
                        if (ch == '\n')
                                s3c24xx_uart_sendb(dev, (uint8_t) '\r');
                        s3c24xx_uart_sendb(dev, (uint8_t) ch);
                }
        }
}

static irq_ownership_t s3c24xx_uart_claim(irq_t *irq)
{
        return IRQ_ACCEPT;
}

static void s3c24xx_uart_irq_handler(irq_t *irq)
{
        s3c24xx_uart_t *uart = irq->instance;

        while ((pio_read_32(&uart->io->ufstat) & S3C24XX_UFSTAT_RX_COUNT) != 0) {
                uint32_t data = pio_read_32(&uart->io->urxh);
                pio_read_32(&uart->io->uerstat);
                indev_push_character(uart->indev, data & 0xff);
        }
}

static outdev_operations_t s3c24xx_uart_ops = {
        .write = s3c24xx_uart_putuchar,
        .redraw = NULL,
        .scroll_up = NULL,
        .scroll_down = NULL
};

outdev_t *s3c24xx_uart_init(uintptr_t paddr, inr_t inr)
{
        outdev_t *uart_dev = malloc(sizeof(outdev_t));
        if (!uart_dev)
                return NULL;

        s3c24xx_uart_t *uart =
            malloc(sizeof(s3c24xx_uart_t));
        if (!uart) {
                free(uart_dev);
                return NULL;
        }

        outdev_initialize("s3c24xx_uart_dev", uart_dev, &s3c24xx_uart_ops);
        uart_dev->data = uart;

        uart->io = (s3c24xx_uart_io_t *) km_map(paddr, PAGE_SIZE, PAGE_SIZE,
            PAGE_WRITE | PAGE_NOT_CACHEABLE);
        uart->indev = NULL;

        /* Initialize IRQ structure. */
        irq_initialize(&uart->irq);
        uart->irq.inr = inr;
        uart->irq.claim = s3c24xx_uart_claim;
        uart->irq.handler = s3c24xx_uart_irq_handler;
        uart->irq.instance = uart;

        /* Enable FIFO, Tx trigger level: empty, Rx trigger level: 1 byte. */
        pio_write_32(&uart->io->ufcon, UFCON_FIFO_ENABLE |
            UFCON_TX_FIFO_TLEVEL_EMPTY | UFCON_RX_FIFO_TLEVEL_1B);

        /* Set RX interrupt to pulse mode */
        pio_write_32(&uart->io->ucon,
            pio_read_32(&uart->io->ucon) & ~UCON_RX_INT_LEVEL);

        ddi_parea_init(&uart->parea);
        uart->parea.pbase = paddr;
        uart->parea.frames = 1;
        uart->parea.unpriv = false;
        uart->parea.mapped = false;
        ddi_parea_register(&uart->parea);

        if (!fb_exported) {
                /*
                 * This is the necessary evil until
                 * the userspace driver is entirely
                 * self-sufficient.
                 */
                sysinfo_set_item_val("fb", NULL, true);
                sysinfo_set_item_val("fb.kind", NULL, 3);
                sysinfo_set_item_val("fb.address.physical", NULL, paddr);

                fb_exported = true;
        }

        return uart_dev;
}

void s3c24xx_uart_input_wire(s3c24xx_uart_t *uart, indev_t *indev)
{
        assert(uart);
        assert(indev);

        uart->indev = indev;
        irq_register(&uart->irq);
}

/** @}
 */