HelenOS sources

root/uspace/drv/bus/usb/ehci/hc.c

DEFINITIONS

1. hc_gen_irq_code
2. hc_add
3. hc_gone
4. hc_enqueue_endpoint
5. hc_dequeue_endpoint
6. ehci_hc_status
7. ehci_hc_schedule
8. ehci_hc_interrupt
9. hc_start
10. hc_setup_roothub
11. hc_init_memory

/*
 * Copyright (c) 2011 Jan Vesely
 * Copyright (c) 2018 Ondrej Hlavaty
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/** @addtogroup drvusbehci
 * @{
 */
/** @file
 * @brief EHCI Host controller driver routines
 */

#include <assert.h>
#include <async.h>
#include <errno.h>
#include <macros.h>
#include <mem.h>
#include <stdlib.h>
#include <stdint.h>
#include <str_error.h>

#include <usb/debug.h>
#include <usb/usb.h>
#include <usb/host/utility.h>

#include "ehci_batch.h"

#include "hc.h"

#define EHCI_USED_INTERRUPTS \
    (USB_INTR_IRQ_FLAG | USB_INTR_ERR_IRQ_FLAG | USB_INTR_PORT_CHANGE_FLAG | \
    USB_INTR_ASYNC_ADVANCE_FLAG | USB_INTR_HOST_ERR_FLAG)

static const irq_pio_range_t ehci_pio_ranges[] = {
        {
                .base = 0,
                .size = sizeof(ehci_regs_t)
        }
};

static const irq_cmd_t ehci_irq_commands[] = {
        {
                .cmd = CMD_PIO_READ_32,
                .dstarg = 1,
                .addr = NULL
        },
        {
                .cmd = CMD_AND,
                .srcarg = 1,
                .dstarg = 2,
                .value = 0
        },
        {
                .cmd = CMD_PREDICATE,
                .srcarg = 2,
                .value = 2
        },
        {
                .cmd = CMD_PIO_WRITE_A_32,
                .srcarg = 1,
                .addr = NULL
        },
        {
                .cmd = CMD_ACCEPT
        }
};

static errno_t hc_init_memory(hc_t *instance);

/** Generate IRQ code.
 * @param[out] ranges PIO ranges buffer.
 * @param[in] hw_res Device's resources.
 *
 * @param[out] irq
 *
 * @return Error code.
 */
errno_t hc_gen_irq_code(irq_code_t *code, hc_device_t *hcd, const hw_res_list_parsed_t *hw_res, int *irq)
{
        assert(code);
        assert(hw_res);
        hc_t *instance = hcd_to_hc(hcd);

        if (hw_res->irqs.count != 1 || hw_res->mem_ranges.count != 1)
                return EINVAL;

        addr_range_t regs = hw_res->mem_ranges.ranges[0];

        if (RNGSZ(regs) < sizeof(ehci_regs_t))
                return EOVERFLOW;

        code->ranges = malloc(sizeof(ehci_pio_ranges));
        if (code->ranges == NULL)
                return ENOMEM;

        code->cmds = malloc(sizeof(ehci_irq_commands));
        if (code->cmds == NULL) {
                free(code->ranges);
                return ENOMEM;
        }

        code->rangecount = ARRAY_SIZE(ehci_pio_ranges);
        code->cmdcount = ARRAY_SIZE(ehci_irq_commands);

        memcpy(code->ranges, ehci_pio_ranges, sizeof(ehci_pio_ranges));
        code->ranges[0].base = RNGABS(regs);

        memcpy(code->cmds, ehci_irq_commands, sizeof(ehci_irq_commands));

        ehci_regs_t *registers =
            (ehci_regs_t *)(RNGABSPTR(regs) + EHCI_RD8(instance->caps->caplength));
        code->cmds[0].addr = (void *) &registers->usbsts;
        code->cmds[3].addr = (void *) &registers->usbsts;
        EHCI_WR(code->cmds[1].value, EHCI_USED_INTERRUPTS);

        usb_log_debug("Memory mapped regs at %p (size %zu), IRQ %d.",
            RNGABSPTR(regs), RNGSZ(regs), hw_res->irqs.irqs[0]);

        *irq = hw_res->irqs.irqs[0];
        return EOK;
}

/** Initialize EHCI hc driver structure
 *
 * @param[in] instance Memory place for the structure.
 * @param[in] regs Device's I/O registers range.
 * @param[in] interrupts True if w interrupts should be used
 * @return Error code
 */
errno_t hc_add(hc_device_t *hcd, const hw_res_list_parsed_t *hw_res)
{
        hc_t *instance = hcd_to_hc(hcd);
        assert(hw_res);
        if (hw_res->mem_ranges.count != 1 ||
            hw_res->mem_ranges.ranges[0].size <
            (sizeof(ehci_caps_regs_t) + sizeof(ehci_regs_t)))
                return EINVAL;

        errno_t ret = pio_enable_range(&hw_res->mem_ranges.ranges[0],
            (void **)&instance->caps);
        if (ret != EOK) {
                usb_log_error("HC(%p): Failed to gain access to device "
                    "registers: %s.", instance, str_error(ret));
                return ret;
        }

        usb_log_info("HC(%p): Device registers at %" PRIx64 " (%zuB) accessible.",
            instance, hw_res->mem_ranges.ranges[0].address.absolute,
            hw_res->mem_ranges.ranges[0].size);
        instance->registers =
            (void *)instance->caps + EHCI_RD8(instance->caps->caplength);
        usb_log_info("HC(%p): Device control registers at %" PRIx64, instance,
            hw_res->mem_ranges.ranges[0].address.absolute +
            EHCI_RD8(instance->caps->caplength));

        list_initialize(&instance->pending_endpoints);
        fibril_mutex_initialize(&instance->guard);
        fibril_condvar_initialize(&instance->async_doorbell);

        ret = hc_init_memory(instance);
        if (ret != EOK) {
                usb_log_error("HC(%p): Failed to create EHCI memory structures:"
                    " %s.", instance, str_error(ret));
                return ret;
        }

        usb_log_info("HC(%p): Initializing RH(%p).", instance, &instance->rh);
        ehci_rh_init(
            &instance->rh, instance->caps, instance->registers, &instance->guard,
            "ehci rh");

        ehci_bus_init(&instance->bus, instance);
        hc_device_setup(hcd, (bus_t *) &instance->bus);
        return EOK;
}

/** Safely dispose host controller internal structures
 *
 * @param[in] instance Host controller structure to use.
 */
int hc_gone(hc_device_t *hcd)
{
        hc_t *hc = hcd_to_hc(hcd);
        endpoint_list_fini(&hc->async_list);
        endpoint_list_fini(&hc->int_list);
        dma_buffer_free(&hc->dma_buffer);
        return EOK;
}

void hc_enqueue_endpoint(hc_t *instance, const endpoint_t *ep)
{
        assert(instance);
        assert(ep);
        ehci_endpoint_t *ehci_ep = ehci_endpoint_get(ep);
        usb_log_debug("HC(%p) enqueue EP(%d:%d:%s:%s)", instance,
            ep->device->address, ep->endpoint,
            usb_str_transfer_type_short(ep->transfer_type),
            usb_str_direction(ep->direction));
        switch (ep->transfer_type) {
        case USB_TRANSFER_CONTROL:
        case USB_TRANSFER_BULK:
                endpoint_list_append_ep(&instance->async_list, ehci_ep);
                break;
        case USB_TRANSFER_INTERRUPT:
                endpoint_list_append_ep(&instance->int_list, ehci_ep);
                break;
        case USB_TRANSFER_ISOCHRONOUS:
                /* NOT SUPPORTED */
                break;
        }
}

void hc_dequeue_endpoint(hc_t *instance, const endpoint_t *ep)
{
        assert(instance);
        assert(ep);
        ehci_endpoint_t *ehci_ep = ehci_endpoint_get(ep);
        usb_log_debug("HC(%p) dequeue EP(%d:%d:%s:%s)", instance,
            ep->device->address, ep->endpoint,
            usb_str_transfer_type_short(ep->transfer_type),
            usb_str_direction(ep->direction));
        switch (ep->transfer_type) {
        case USB_TRANSFER_INTERRUPT:
                endpoint_list_remove_ep(&instance->int_list, ehci_ep);
                /* Fall through */
        case USB_TRANSFER_ISOCHRONOUS:
                /* NOT SUPPORTED */
                return;
        case USB_TRANSFER_CONTROL:
        case USB_TRANSFER_BULK:
                endpoint_list_remove_ep(&instance->async_list, ehci_ep);
                break;
        }
        fibril_mutex_lock(&instance->guard);
        usb_log_debug("HC(%p): Waiting for doorbell", instance);
        EHCI_SET(instance->registers->usbcmd, USB_CMD_IRQ_ASYNC_DOORBELL);
        fibril_condvar_wait(&instance->async_doorbell, &instance->guard);
        usb_log_debug2("HC(%p): Got doorbell", instance);
        fibril_mutex_unlock(&instance->guard);
}

errno_t ehci_hc_status(bus_t *bus_base, uint32_t *status)
{
        assert(bus_base);
        assert(status);

        ehci_bus_t *bus = (ehci_bus_t *) bus_base;
        hc_t *hc = bus->hc;
        assert(hc);

        *status = 0;
        if (hc->registers) {
                *status = EHCI_RD(hc->registers->usbsts);
                EHCI_WR(hc->registers->usbsts, *status);
        }
        usb_log_debug2("HC(%p): Read status: %x", hc, *status);
        return EOK;
}

/** Add USB transfer to the schedule.
 *
 * @param[in] hcd HCD driver structure.
 * @param[in] batch Batch representing the transfer.
 * @return Error code.
 */
errno_t ehci_hc_schedule(usb_transfer_batch_t *batch)
{
        assert(batch);

        ehci_bus_t *bus = (ehci_bus_t *) endpoint_get_bus(batch->ep);
        hc_t *hc = bus->hc;
        assert(hc);

        /* Check for root hub communication */
        if (batch->target.address == ehci_rh_get_address(&hc->rh)) {
                usb_log_debug("HC(%p): Scheduling BATCH(%p) for RH(%p)",
                    hc, batch, &hc->rh);
                return ehci_rh_schedule(&hc->rh, batch);
        }

        endpoint_t *const ep = batch->ep;
        ehci_endpoint_t *const ehci_ep = ehci_endpoint_get(ep);
        ehci_transfer_batch_t *ehci_batch = ehci_transfer_batch_get(batch);

        int err;

        if ((err = ehci_transfer_batch_prepare(ehci_batch)))
                return err;

        fibril_mutex_lock(&hc->guard);

        if ((err = endpoint_activate_locked(ep, batch))) {
                fibril_mutex_unlock(&hc->guard);
                return err;
        }

        usb_log_debug("HC(%p): Committing BATCH(%p)", hc, batch);
        ehci_transfer_batch_commit(ehci_batch);

        /* Enqueue endpoint to the checked list */
        usb_log_debug2("HC(%p): Appending BATCH(%p)", hc, batch);
        list_append(&ehci_ep->pending_link, &hc->pending_endpoints);

        fibril_mutex_unlock(&hc->guard);
        return EOK;
}

/** Interrupt handling routine
 *
 * @param[in] hcd HCD driver structure.
 * @param[in] status Value of the status register at the time of interrupt.
 */
void ehci_hc_interrupt(bus_t *bus_base, uint32_t status)
{
        assert(bus_base);

        ehci_bus_t *bus = (ehci_bus_t *) bus_base;
        hc_t *hc = bus->hc;
        assert(hc);

        usb_log_debug2("HC(%p): Interrupt: %" PRIx32, hc, status);
        if (status & USB_STS_PORT_CHANGE_FLAG) {
                ehci_rh_interrupt(&hc->rh);
        }

        if (status & USB_STS_IRQ_ASYNC_ADVANCE_FLAG) {
                fibril_mutex_lock(&hc->guard);
                usb_log_debug2("HC(%p): Signaling doorbell", hc);
                fibril_condvar_broadcast(&hc->async_doorbell);
                fibril_mutex_unlock(&hc->guard);
        }

        if (status & (USB_STS_IRQ_FLAG | USB_STS_ERR_IRQ_FLAG)) {
                fibril_mutex_lock(&hc->guard);

                usb_log_debug2("HC(%p): Scanning %zu pending endpoints", hc,
                    list_count(&hc->pending_endpoints));
                list_foreach_safe(hc->pending_endpoints, current, next) {
                        ehci_endpoint_t *ep =
                            list_get_instance(current, ehci_endpoint_t, pending_link);

                        ehci_transfer_batch_t *batch =
                            ehci_transfer_batch_get(ep->base.active_batch);
                        assert(batch);

                        if (ehci_transfer_batch_check_completed(batch)) {
                                endpoint_deactivate_locked(&ep->base);
                                list_remove(current);
                                hc_reset_toggles(&batch->base, &ehci_ep_toggle_reset);
                                usb_transfer_batch_finish(&batch->base);
                        }
                }
                fibril_mutex_unlock(&hc->guard);

        }

        if (status & USB_STS_HOST_ERROR_FLAG) {
                usb_log_fatal("HCD(%p): HOST SYSTEM ERROR!", hc);
                //TODO do something here
        }
}

/** EHCI hw initialization routine.
 *
 * @param[in] instance EHCI hc driver structure.
 */
int hc_start(hc_device_t *hcd)
{
        hc_t *instance = hcd_to_hc(hcd);
        usb_log_debug("HC(%p): Starting HW.", instance);

        /*
         * Turn off the HC if it's running, Reseting a running device is
         * undefined
         */
        if (!(EHCI_RD(instance->registers->usbsts) & USB_STS_HC_HALTED_FLAG)) {
                /* disable all interrupts */
                EHCI_WR(instance->registers->usbintr, 0);
                /* ack all interrupts */
                EHCI_WR(instance->registers->usbsts, 0x3f);
                /* Stop HC hw */
                EHCI_WR(instance->registers->usbcmd, 0);
                /* Wait until hc is halted */
                while ((EHCI_RD(instance->registers->usbsts) & USB_STS_HC_HALTED_FLAG) == 0) {
                        fibril_usleep(1);
                }
                usb_log_info("HC(%p): EHCI turned off.", instance);
        } else {
                usb_log_info("HC(%p): EHCI was not running.", instance);
        }

        /* Hw initialization sequence, see page 53 (pdf 63) */
        EHCI_SET(instance->registers->usbcmd, USB_CMD_HC_RESET_FLAG);
        usb_log_info("HC(%p): Waiting for HW reset.", instance);
        while (EHCI_RD(instance->registers->usbcmd) & USB_CMD_HC_RESET_FLAG) {
                fibril_usleep(1);
        }
        usb_log_debug("HC(%p): HW reset OK.", instance);

        /* Use the lowest 4G segment */
        EHCI_WR(instance->registers->ctrldssegment, 0);

        /* Enable periodic list */
        assert(instance->periodic_list);
        uintptr_t phys_base =
            addr_to_phys((void *)instance->periodic_list);
        assert((phys_base & USB_PERIODIC_LIST_BASE_MASK) == phys_base);
        EHCI_WR(instance->registers->periodiclistbase, phys_base);
        EHCI_SET(instance->registers->usbcmd, USB_CMD_PERIODIC_SCHEDULE_FLAG);
        usb_log_debug("HC(%p): Enabled periodic list.", instance);

        /* Enable Async schedule */
        phys_base = addr_to_phys((void *)instance->async_list.list_head);
        assert((phys_base & USB_ASYNCLIST_MASK) == phys_base);
        EHCI_WR(instance->registers->asynclistaddr, phys_base);
        EHCI_SET(instance->registers->usbcmd, USB_CMD_ASYNC_SCHEDULE_FLAG);
        usb_log_debug("HC(%p): Enabled async list.", instance);

        /* Start hc and get all ports */
        EHCI_SET(instance->registers->usbcmd, USB_CMD_RUN_FLAG);
        EHCI_SET(instance->registers->configflag, USB_CONFIG_FLAG_FLAG);
        usb_log_debug("HC(%p): HW started.", instance);

        usb_log_debug2("HC(%p): Registers: "
            "\tUSBCMD(%p): %x(0x00080000 = at least 1ms between interrupts)"
            "\tUSBSTS(%p): %x(0x00001000 = HC halted)"
            "\tUSBINT(%p): %x(0x0 = no interrupts)."
            "\tCONFIG(%p): %x(0x0 = ports controlled by companion hc).",
            instance,
            &instance->registers->usbcmd, EHCI_RD(instance->registers->usbcmd),
            &instance->registers->usbsts, EHCI_RD(instance->registers->usbsts),
            &instance->registers->usbintr, EHCI_RD(instance->registers->usbintr),
            &instance->registers->configflag, EHCI_RD(instance->registers->configflag));
        /* Clear and Enable interrupts */
        EHCI_WR(instance->registers->usbsts, EHCI_RD(instance->registers->usbsts));
        EHCI_WR(instance->registers->usbintr, EHCI_USED_INTERRUPTS);

        return EOK;
}

/**
 * Setup roothub as a virtual hub.
 */
int hc_setup_roothub(hc_device_t *hcd)
{
        return hc_setup_virtual_root_hub(hcd, USB_SPEED_HIGH);
}

/** Initialize memory structures used by the EHCI hcd.
 *
 * @param[in] instance EHCI hc driver structure.
 * @return Error code.
 */
errno_t hc_init_memory(hc_t *instance)
{
        assert(instance);
        usb_log_debug2("HC(%p): Initializing Async list(%p).", instance,
            &instance->async_list);
        errno_t ret = endpoint_list_init(&instance->async_list, "ASYNC");
        if (ret != EOK) {
                usb_log_error("HC(%p): Failed to setup ASYNC list: %s",
                    instance, str_error(ret));
                return ret;
        }
        /*
         * Specs say "Software must set queue head horizontal pointer T-bits to
         * a zero for queue heads in the asynchronous schedule" (4.4.0).
         * So we must maintain circular buffer (all horizontal pointers
         * have to be valid
         */
        endpoint_list_chain(&instance->async_list, &instance->async_list);

        usb_log_debug2("HC(%p): Initializing Interrupt list (%p).", instance,
            &instance->int_list);
        ret = endpoint_list_init(&instance->int_list, "INT");
        if (ret != EOK) {
                usb_log_error("HC(%p): Failed to setup INT list: %s",
                    instance, str_error(ret));
                endpoint_list_fini(&instance->async_list);
                return ret;
        }

        /* Take 1024 periodic list heads, we ignore low mem options */
        if (dma_buffer_alloc(&instance->dma_buffer, PAGE_SIZE)) {
                usb_log_error("HC(%p): Failed to get ISO schedule page.",
                    instance);
                endpoint_list_fini(&instance->async_list);
                endpoint_list_fini(&instance->int_list);
                return ENOMEM;
        }
        instance->periodic_list = instance->dma_buffer.virt;

        usb_log_debug2("HC(%p): Initializing Periodic list.", instance);
        for (unsigned i = 0; i < PAGE_SIZE / sizeof(link_pointer_t); ++i) {
                /* Disable everything for now */
                instance->periodic_list[i] =
                    LINK_POINTER_QH(addr_to_phys(instance->int_list.list_head));
        }
        return EOK;
}

/**
 * @}
 */